# How to set a printer.xxx value

**URL:** <https://klipper.discourse.group/t/how-to-set-a-printer-xxx-value/1449>\
**Category:** General Discussion\
**Created:** [November 29, 2021, 8:00pm UTC](https://klipper.discourse.group/t/how-to-set-a-printer-xxx-value/1449 "2021-11-29T20:00:54Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Fuksas](https://avatars.discourse-cdn.com/v4/letter/f/f14d63/32.png) [@Fuksas](https://klipper.discourse.group/u/Fuksas)\
**Post date:** [November 30, 2021, 3:12pm UTC](https://klipper.discourse.group/t/how-to-set-a-printer-xxx-value/1449/2 "2021-11-30T15:12:47Z")

</div>

[https://klipper.discourse.group/t/macro-creation-tutorial/30/8](https://klipper.discourse.group/t/macro-creation-tutorial/30/8)  
“It should also be noted that you cannot change any of the values found in the  
`printer` object. The only way to change anything is if there is an available gcode  
to do so.”

---

_[View the full topic](https://klipper.discourse.group/t/how-to-set-a-printer-xxx-value/1449)._
