# I have problem with "Move out of range: 0.000 0.000 5.000

**URL:** <https://klipper.discourse.group/t/i-have-problem-with-move-out-of-range-0-000-0-000-5-000/2405>\
**Category:** General Discussion\
**Created:** [March 26, 2022, 9:50pm UTC](https://klipper.discourse.group/t/i-have-problem-with-move-out-of-range-0-000-0-000-5-000/2405 "2022-03-26T21:50:37Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![MickeD](https://avatars.discourse-cdn.com/v4/letter/m/7cd45c/32.png) [@MickeD](https://klipper.discourse.group/u/MickeD)\
**Post date:** [March 26, 2022, 9:50pm UTC](https://klipper.discourse.group/t/i-have-problem-with-move-out-of-range-0-000-0-000-5-000/2405/1 "2022-03-26T21:50:38Z")

</div>

I got some problem with my Klipper when trying to do a BED\_MESH\_CALIBRATE  
Get “Move out of range: 0.000 0.000 5.000 [0.000]”  
[printer.cfg](https://klipper.discourse.group/uploads/short-url/gOvOWBoU5AMQWB2YWPvxezcay5R.cfg) (6.2 KB)

Nead some help to solve this problem.

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [March 26, 2022, 10:02pm UTC](https://klipper.discourse.group/t/i-have-problem-with-move-out-of-range-0-000-0-000-5-000/2405/2 "2022-03-26T22:02:16Z")

</div>

Hello @MickeD !

```auto
[bltouch] # enable for BLTouch
sensor_pin: ^PB1
control_pin: PB0
x_offset: -23.4 # -23.4
y_offset: -8 # -8
#z_offset: 0    
speed: 1.3

```

At 0.000 0.000, the BL-Touch is out of the bed.

You have to start at leat at 24.000 9.000 with the bed mesh. Better would be 25.000 10.000

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [October 30, 2024, 8:41pm UTC](https://klipper.discourse.group/t/i-have-problem-with-move-out-of-range-0-000-0-000-5-000/2405/3 "2024-10-30T20:41:55Z")

</div>