# Increasing horizontal\_move\_z during Z\_TILT\_ADJUST **URL:** \ **Category:** General Discussion\ **Created:** [April 23, 2024, 12:56pm UTC](https://klipper.discourse.group/t/increasing-horizontal-move-z-during-z-tilt-adjust/15976 "2024-04-23T12:56:45Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![SinisterRj](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sinisterrj/32/6252_2.png) [@SinisterRj](https://klipper.discourse.group/u/SinisterRj)\ **Post date:** [April 23, 2024, 12:56pm UTC](https://klipper.discourse.group/t/increasing-horizontal-move-z-during-z-tilt-adjust/15976/1 "2024-04-23T12:56:45Z")
### Basic Information: Printer Model: Voron Trizero (V0.2 mod with tillable bed) MCU / Printerboard: Double BTT SKR Pico Host / SBC: BTT pi klippy.log ### Describe your issue: I have a Voron Trizero with zero click (small version of Klicky) probe. I don’t know if it is some strange interaction between Klicky macros and Klipper, or if it just some bug on Klipper. But every time I do a Z\_TILT\_ADJUST command, the printer uses the “horizontal\_move\_z” height on the first 3 measurements points, make the initial corrections and then increase the horizontal\_move\_z height, or apply it twice, for the next measurements. So, because of it the Z tilt processes takes too long to finish. I made a small video to exemplify the problem. If you take a look at it, you can observe the different Z height between the first XY move to the second XY move. [https://youtu.be/GWYkflWfZSs?si=XDhoosJ7XM-8lM8v](https://youtu.be/GWYkflWfZSs?si=XDhoosJ7XM-8lM8v) [klippy-5.log](https://klipper.discourse.group/uploads/short-url/zOzU1SZeSSwpfapPLBoARbSnmeH.log) (6.7 MB) ---
**Author:** ![gaolst](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/gaolst/32/10026_2.png) [@gaolst](https://klipper.discourse.group/u/gaolst)\ **Post date:** [April 23, 2024, 6:34pm UTC](https://klipper.discourse.group/t/increasing-horizontal-move-z-during-z-tilt-adjust/15976/2 "2024-04-23T18:34:31Z")
Most probably your Klicky integration is resetting toolhead offsets during Z\_TILT\_ADJUST execution. Currently Z\_TILT\_ADJUST code is using a constant value of “horizontal\_move\_z” when changing probe points, so it must be something else which reacts on klipper events and screwing Z position Also i did see you have there third-party “z\_calibration”, as a tryout - try to disable it, maybe it’s causing this. ---
**Author:** ![SinisterRj](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sinisterrj/32/6252_2.png) [@SinisterRj](https://klipper.discourse.group/u/SinisterRj)\ **Post date:** [April 24, 2024, 12:54pm UTC](https://klipper.discourse.group/t/increasing-horizontal-move-z-during-z-tilt-adjust/15976/3 "2024-04-24T12:54:14Z")
Thanks for your help. I uninstalled the Z\_Calibration plugin, but nothing changed. Any other idea? There is any way of monitoring Klipper events to try to detect what is triggered by this event? ---
**Author:** ![gaolst](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/gaolst/32/10026_2.png) [@gaolst](https://klipper.discourse.group/u/gaolst)\ **Post date:** [April 24, 2024, 5:30pm UTC](https://klipper.discourse.group/t/increasing-horizontal-move-z-during-z-tilt-adjust/15976/4 "2024-04-24T17:30:40Z")
Your configuration have 2 User variables which controls Klicky debug ouput try to enable them and analyze Klicky debug messages. Or collect All of them and send here - I will try to analyze. ```auto [gcode_macro _User_Variables] variable_verbose = False variable_debug = False ``` Klipper also can produce additional messages in log, to enable it you need to add “-v” options in klipper startup string. ---
**Author:** ![SinisterRj](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sinisterrj/32/6252_2.png) [@SinisterRj](https://klipper.discourse.group/u/SinisterRj)\ **Post date:** [May 6, 2024, 12:41pm UTC](https://klipper.discourse.group/t/increasing-horizontal-move-z-during-z-tilt-adjust/15976/5 "2024-05-06T12:41:13Z")
The verbose and debug variables are true. But how do I change the Klipper startup string do “-v”? ---
**Author:** ![gaolst](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/gaolst/32/10026_2.png) [@gaolst](https://klipper.discourse.group/u/gaolst)\ **Post date:** [May 6, 2024, 1:24pm UTC](https://klipper.discourse.group/t/increasing-horizontal-move-z-during-z-tilt-adjust/15976/6 "2024-05-06T13:24:16Z")
Usually there is a file which control klipper startup: /etc/systemd/system/klipper.service you can try to edit it with elevated permissions > sudo editor /etc/systemd/system/klipper.service introduce changes, then save and reboot. ---
**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\ **Post date:** [July 5, 2024, 1:24pm UTC](https://klipper.discourse.group/t/increasing-horizontal-move-z-during-z-tilt-adjust/15976/7 "2024-07-05T13:24:49Z")
This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.