# Internal error on command:"g1/TMC 'extruder' reports GSTAT: 00000001 reset=1(Reset) TMC 'extruder' reports GSTAT: 00000000 Pausing toolhead to calculate extruder phase offset

**URL:** <https://klipper.discourse.group/t/internal-error-on-command-g1-tmc-extruder-reports-gstat-00000001-reset-1-reset-tmc-extruder-reports-gstat-00000000-pausing-toolhead-to-calculate-extruder-phase-offset/2856>\
**Category:** General Discussion\
**Created:** [May 11, 2022, 12:31am UTC](https://klipper.discourse.group/t/internal-error-on-command-g1-tmc-extruder-reports-gstat-00000001-reset-1-reset-tmc-extruder-reports-gstat-00000000-pausing-toolhead-to-calculate-extruder-phase-offset/2856 "2022-05-11T00:31:39Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![FatNasty](https://avatars.discourse-cdn.com/v4/letter/f/8edcca/32.png) [@FatNasty](https://klipper.discourse.group/u/FatNasty)\
**Post date:** [May 11, 2022, 12:31am UTC](https://klipper.discourse.group/t/internal-error-on-command-g1-tmc-extruder-reports-gstat-00000001-reset-1-reset-tmc-extruder-reports-gstat-00000000-pausing-toolhead-to-calculate-extruder-phase-offset/2856/1 "2022-05-11T00:31:39Z")

</div>

Ender 6 With a skr mini e3 v3 board with bondtech ddx v3, printer has been completley re wired for about 2 months now but started giving me these errors. i have updated klipper but an not sure where to even start looking. Thank you for looking.  
[klippy.zip](https://klipper.discourse.group/uploads/short-url/nbScaCrU7jwggXov26agAYZjPAL.zip) (2.3 MB)

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [May 11, 2022, 5:16am UTC](https://klipper.discourse.group/t/internal-error-on-command-g1-tmc-extruder-reports-gstat-00000001-reset-1-reset-tmc-extruder-reports-gstat-00000000-pausing-toolhead-to-calculate-extruder-phase-offset/2856/2 "2022-05-11T05:16:30Z")

</div>

See [TMC 'extruder' reports error: GSTAT: 00000001 reset=1(reset - #39 by Sineos](https://klipper.discourse.group/t/tmc-extruder-reports-error-gstat-00000001-reset-1-reset/1156/39)

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [July 16, 2026, 3:55pm UTC](https://klipper.discourse.group/t/internal-error-on-command-g1-tmc-extruder-reports-gstat-00000001-reset-1-reset-tmc-extruder-reports-gstat-00000000-pausing-toolhead-to-calculate-extruder-phase-offset/2856/3 "2026-07-16T15:55:56Z")

</div>