# Internal error on G1 step compress

**URL:** <https://klipper.discourse.group/t/internal-error-on-g1-step-compress/9097>\
**Category:** General Discussion\
**Created:** [June 22, 2023, 5:24pm UTC](https://klipper.discourse.group/t/internal-error-on-g1-step-compress/9097 "2023-06-22T17:24:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![skierskiiing](https://avatars.discourse-cdn.com/v4/letter/s/958977/32.png) [@skierskiiing](https://klipper.discourse.group/u/skierskiiing)\
**Post date:** [June 22, 2023, 5:24pm UTC](https://klipper.discourse.group/t/internal-error-on-g1-step-compress/9097/1 "2023-06-22T17:24:18Z")

</div>

### Basic Information:

Printer Model: voron 2.4  
 MCU / Printerboard: ras pi 3b btt octopus 1.1  
 `klippy.log` [https://drive.google.com/file/d/1Bhp\_dGh\_RXi2AzdD84HIYqOjt4py3rE2/view?usp=drive\_link](https://drive.google.com/file/d/1Bhp_dGh_RXi2AzdD84HIYqOjt4py3rE2/view?usp=drive_link)  
_Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_**. _Pasting your_ `printer.cfg` _is **not** needed_

### Describe your issue: when i start a print everything runs as it should then at about 3-6 hours into any print my voron shuts down and gives “internal error on g1”

…

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [April 16, 2026, 7:21pm UTC](https://klipper.discourse.group/t/internal-error-on-g1-step-compress/9097/2 "2026-04-16T19:21:33Z")

</div>