# Is there a way to configure Klipper so it doesn't shutdown with every single little problem?

**URL:** <https://klipper.discourse.group/t/is-there-a-way-to-configure-klipper-so-it-doesnt-shutdown-with-every-single-little-problem/25338>\
**Category:** General Discussion\
**Created:** [December 11, 2025, 8:40am UTC](https://klipper.discourse.group/t/is-there-a-way-to-configure-klipper-so-it-doesnt-shutdown-with-every-single-little-problem/25338 "2025-12-11T08:40:26Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![hcet14](https://avatars.discourse-cdn.com/v4/letter/h/ecd19e/32.png) [@hcet14](https://klipper.discourse.group/u/hcet14)\
**Post date:** [December 13, 2025, 1:29pm UTC](https://klipper.discourse.group/t/is-there-a-way-to-configure-klipper-so-it-doesnt-shutdown-with-every-single-little-problem/25338/4 "2025-12-13T13:29:46Z")

</div>

> [@JuanR3D](#):
>
> With that in mind, I’m interested in knowing where I could modify at least some parts of the code to customize this behaviour for my machine, as I don’t mind maintaining these changes myself.

You may have a look here [GitHub - KalicoCrew/kalico: Klipper, but Limitless](https://github.com/KalicoCrew/kalico).

But I would not recommend it [Heater Bed Temperature is increasing without heating - #20 by hcet14](https://klipper.discourse.group/t/heater-bed-temperature-is-increasing-without-heating/10894/20)!!!

---

_[View the full topic](https://klipper.discourse.group/t/is-there-a-way-to-configure-klipper-so-it-doesnt-shutdown-with-every-single-little-problem/25338)._