# Issues with CANable

**URL:** <https://klipper.discourse.group/t/issues-with-canable/7970>\
**Category:** General Discussion\
**Created:** [April 21, 2023, 7:54pm UTC](https://klipper.discourse.group/t/issues-with-canable/7970 "2023-04-21T19:54:51Z")\
**Posts on this page:** 1\
**Showing post:** 40

<div class="post-metadata">

**Author:** ![jakep\_82](https://avatars.discourse-cdn.com/v4/letter/j/ea666f/32.png) [@jakep\_82](https://klipper.discourse.group/u/jakep_82)\
**Post date:** [April 23, 2023, 10:38pm UTC](https://klipper.discourse.group/t/issues-with-canable/7970/40 "2023-04-23T22:38:14Z")

</div>

Please post the contents of /etc/network/interfaces.d/can0.

It’s also not clear to me if the firmware you flashed on the CANable is meant for the MKS clone. I built candlelight firmware from source specifically for the MKS clone if you want to try it. I’ve been using the non-pro version of the MKS CANable for quite some time on my 2.4 with no issues. I run Huvuds on my A and B motors, and an SB2040 on the toolhead all running through the CANable at 1M.

[CANable\_MKS\_fw.bin.zip](https://klipper.discourse.group/uploads/short-url/f1RVaI0tolpBBdyMOtNtcqnvWxL.zip) (12.7 KB)

---

_[View the full topic](https://klipper.discourse.group/t/issues-with-canable/7970)._