# It is not possible to cancel printing immediately after the start, until the heating occurs!

**URL:** <https://klipper.discourse.group/t/it-is-not-possible-to-cancel-printing-immediately-after-the-start-until-the-heating-occurs/9433>\
**Category:** Features\
**Created:** [July 13, 2023, 6:13pm UTC](https://klipper.discourse.group/t/it-is-not-possible-to-cancel-printing-immediately-after-the-start-until-the-heating-occurs/9433 "2023-07-13T18:13:01Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![hcet14](https://avatars.discourse-cdn.com/v4/letter/h/ecd19e/32.png) [@hcet14](https://klipper.discourse.group/u/hcet14)\
**Post date:** [July 13, 2023, 6:54pm UTC](https://klipper.discourse.group/t/it-is-not-possible-to-cancel-printing-immediately-after-the-start-until-the-heating-occurs/9433/2 "2023-07-13T18:54:34Z")

</div>

Hi MistKear,

(no personal affront, we need facts, especially “klippy.log”!!!)

Please fill it out!!!

Helping people here are getting bored and a little angry, if you don’t!

### Basic Information:

Printer Model:  
 MCU / Printerboard:  
 `klippy.log`

_Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_**. _Pasting your_ `printer.cfg` _is **not** needed_  
_**Be sure to check our [Knowledge Base](https://klipper.discourse.group/t/about-the-knowledge-base-category-table-of-contents/6228) and in particular [this](https://klipper.discourse.group/t/how-to-trouble-shoot/6326) and [this](https://klipper.discourse.group/t/how-to-ask-for-help/6327) post**_

### Describe your issue:

…

---

_[View the full topic](https://klipper.discourse.group/t/it-is-not-possible-to-cancel-printing-immediately-after-the-start-until-the-heating-occurs/9433)._