# KAMP only probing 3x3

**URL:** <https://klipper.discourse.group/t/kamp-only-probing-3x3/15480>\
**Category:** General Discussion\
**Created:** [April 3, 2024, 9:00pm UTC](https://klipper.discourse.group/t/kamp-only-probing-3x3/15480 "2024-04-03T21:00:18Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![ejbommer](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/ejbommer/32/6119_2.png) [@ejbommer](https://klipper.discourse.group/u/ejbommer)\
**Post date:** [April 3, 2024, 9:00pm UTC](https://klipper.discourse.group/t/kamp-only-probing-3x3/15480/1 "2024-04-03T21:00:18Z")

</div>

### Basic Information:

Printer Model: Ender 7  
 MCU / Printerboard: SKR 1.4 Turbo

### Describe your issue:

I have install Kamp for adaptive bed mesh, it is probing the correct area , but only probes 3x3 and does not follow the “probe\_count: 5, 5” found in Printer.cfg. I’ve read through the code and it seems like it should work, but I must be missing something. Any help is appreciated.

[bed\_mesh] # enable for BLTouch  
speed: 50  
horizontal\_move\_z: 8  
mesh\_min: 35, 35  
mesh\_max: 255, 260  
algorithm: bicubic  
bicubic\_tension: 0.2  
probe\_count: 5, 5  
mesh\_pps: 2, 2  
fade\_start: 1  
fade\_end: 10  
fade\_target: 0

[klippy.log](https://klipper.discourse.group/uploads/short-url/zKUQ9RIZeltaUPtcrdQfH5ksD5z.log) (3.7 MB)

…

---

<div class="post-metadata">

**Author:** ![voidtrance](https://avatars.discourse-cdn.com/v4/letter/v/b77776/32.png) [@voidtrance](https://klipper.discourse.group/u/voidtrance)\
**Post date:** [April 3, 2024, 10:21pm UTC](https://klipper.discourse.group/t/kamp-only-probing-3x3/15480/2 "2024-04-03T22:21:21Z")

</div>

KAMP scales down the number of probe points based on the size of the area that is being probed.

Having said that, Klipper now natively supports adaptive meshing.

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [April 4, 2024, 3:14am UTC](https://klipper.discourse.group/t/kamp-only-probing-3x3/15480/3 "2024-04-04T03:14:08Z")

</div>

@ejbommer

Have you additionally installed KAMP on Klipper 0.12.0 ?

---

<div class="post-metadata">

**Author:** ![ejbommer](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/ejbommer/32/6119_2.png) [@ejbommer](https://klipper.discourse.group/u/ejbommer)\
**Post date:** [April 4, 2024, 5:54pm UTC](https://klipper.discourse.group/t/kamp-only-probing-3x3/15480/4 "2024-04-04T17:54:20Z")

</div>

I am using the latest Klipper and using Kamp.

I’ve done some further checking from " [voidtrance]" comment, and he is correct. The number of positions is based off of the maximum bed size. So it is working as expected.

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [April 4, 2024, 6:42pm UTC](https://klipper.discourse.group/t/kamp-only-probing-3x3/15480/5 "2024-04-04T18:42:42Z")

</div>

> [@ejbommer](#):
>
> I am using the latest Klipper and using Kamp.

With the recent version of Klipper, you do not need KAMP:

[https://www.klipper3d.org/Bed\_Mesh.html#adaptive-meshes](https://www.klipper3d.org/Bed_Mesh.html#adaptive-meshes)

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [May 5, 2024, 4:42am UTC](https://klipper.discourse.group/t/kamp-only-probing-3x3/15480/6 "2024-05-05T04:42:52Z")

</div>

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.