# Kipper error k1 max

**URL:** <https://klipper.discourse.group/t/kipper-error-k1-max/25227>\
**Category:** General Discussion\
**Created:** [November 18, 2025, 10:53pm UTC](https://klipper.discourse.group/t/kipper-error-k1-max/25227 "2025-11-18T22:53:05Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![mrplasma](https://avatars.discourse-cdn.com/v4/letter/m/a87d85/32.png) [@mrplasma](https://klipper.discourse.group/u/mrplasma)\
**Post date:** [November 18, 2025, 10:53pm UTC](https://klipper.discourse.group/t/kipper-error-k1-max/25227/1 "2025-11-18T22:53:05Z")

</div>

### Basic Information:

Printer Model: Creality K1 Max  
 MCU / Printerboard: creality  
 Host / SBC  
 klippy.log

[printer.zip](https://klipper.discourse.group/uploads/short-url/k1wFGAwttuiy2ao54CRpD7d9XDW.zip) (3.9 KB)

[klippy.zip](https://klipper.discourse.group/uploads/short-url/nfbLvDUHZWJQnVpqJkTyAsXDVBr.zip) (7.5 MB)

_Fill out above information and_ _ **in all cases attach your** _ **`klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_  
_ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _

### Describe your issues

I’m currently run in to a problem with the error

{“code”: “key341”, “msg”: “Section ‘gcoce\_macro adapt\_purge\_mod’ is not a valid config section\n\nOnce the underlying issue is corrected, use the \“RESTART\”\ncommand to reload the config and restart the host software.\nPrinter is halted\n”, “values”: [“gcoce\_macro adapt\_purge\_mod”]}

I see that the 'gcoce\_macro adapt\_purge\_mod is miss spelled and I’m not sure how to fix it

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [November 19, 2025, 7:10am UTC](https://klipper.discourse.group/t/kipper-error-k1-max/25227/2 "2025-11-19T07:10:10Z")

</div>

Hello @mrplasma !

I don’t know that we can help you: [3D Printers with Preinstalled and Modified Klipper Versions](https://klipper.discourse.group/t/3d-printers-with-preinstalled-and-modified-klipper-versions/20467/1)

---

<div class="post-metadata">

**Author:** ![mrplasma](https://avatars.discourse-cdn.com/v4/letter/m/a87d85/32.png) [@mrplasma](https://klipper.discourse.group/u/mrplasma)\
**Post date:** [November 19, 2025, 2:29pm UTC](https://klipper.discourse.group/t/kipper-error-k1-max/25227/3 "2025-11-19T14:29:40Z")

</div>

Ok…….. I have fix the current issue with the misspelling I found somebody that came across the same issue and fixed it we re-uploaded a different kamp file to fix it.

But now I’m running into a new issue where clippers not connecting to Moonraker and I’ve tried to uninstall and reinstall both and it still having problems

---

<div class="post-metadata">

**Author:** ![3dcoded](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/3dcoded/32/20297_2.png) [@3dcoded](https://klipper.discourse.group/u/3dcoded)\
**Post date:** [November 19, 2025, 3:37pm UTC](https://klipper.discourse.group/t/kipper-error-k1-max/25227/4 "2025-11-19T15:37:59Z")

</div>

Hi @mrplasma ,

The K1 series runs a heavily modified “Klipper” version, so we can’t help much. Please reach out to Creality support for this issue.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [January 18, 2026, 3:38pm UTC](https://klipper.discourse.group/t/kipper-error-k1-max/25227/5 "2026-01-18T15:38:01Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.