# Klipper not initializing **URL:** \ **Category:** General Discussion\ **Created:** [February 15, 2023, 10:42pm UTC](https://klipper.discourse.group/t/klipper-not-initializing/6688 "2023-02-15T22:42:12Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![BigSmitt77](https://avatars.discourse-cdn.com/v4/letter/b/f04885/32.png) [@BigSmitt77](https://klipper.discourse.group/u/BigSmitt77)\ **Post date:** [February 15, 2023, 10:42pm UTC](https://klipper.discourse.group/t/klipper-not-initializing/6688/1 "2023-02-15T22:42:12Z")
### Basic Information: Printer Model: Ender 3 S1 Pro MCU / Printerboard: `klippy.log` ### Describe your issue: I’ve been printing on a new setup ( Ender 3S1 Pro w/Sonic pad) for 29 days, I have not updated to the January or the February updates. All has been fine until….. I powered down and unplugged the power cords and swapped the table the printer was sitting on. Plugged the power cords back in and the sonic pad now will not see the printer, see wifi, control anything. I’ve tried resetting to factory, get failed notification. Reset button on back of pad. Nada Update via usb. Nothing Tried a new usb cord as well as the original. Nada. ---
**Author:** ![jakep\_82](https://avatars.discourse-cdn.com/v4/letter/j/ea666f/32.png) [@jakep\_82](https://klipper.discourse.group/u/jakep_82)\ **Post date:** [February 16, 2023, 12:44am UTC](https://klipper.discourse.group/t/klipper-not-initializing/6688/2 "2023-02-16T00:44:54Z")
You’ll need to contact Creality. The sonic pad doesn’t run a stock version of Klipper, and it’s completely locked down. ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [June 11, 2024, 9:14pm UTC](https://klipper.discourse.group/t/klipper-not-initializing/6688/3 "2024-06-11T21:14:35Z")