# Klipper shutting down during print

**URL:** <https://klipper.discourse.group/t/klipper-shutting-down-during-print/6844>\
**Category:** General Discussion\
**Created:** [February 23, 2023, 3:48pm UTC](https://klipper.discourse.group/t/klipper-shutting-down-during-print/6844 "2023-02-23T15:48:23Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Raghav](https://avatars.discourse-cdn.com/v4/letter/r/54ee81/32.png) [@Raghav](https://klipper.discourse.group/u/Raghav)\
**Post date:** [February 23, 2023, 3:48pm UTC](https://klipper.discourse.group/t/klipper-shutting-down-during-print/6844/1 "2023-02-23T15:48:23Z")

</div>

### Basic Information:

Printer Model: Ender 3  
MCU / Printerboard: ATmega1284P  
Klippy log: [klippy (1).log](https://klipper.discourse.group/uploads/short-url/57iuZw9UMmYoSXI7tH9Td8pdEdx.log) (5.1 MB)  
Moonraker log: [moonraker.log](https://klipper.discourse.group/uploads/short-url/fm3L7XCCpZDmpKwQgAKZHe0oYXV.log) (131.3 KB)

### Describe your issue:

Out of nowhere my prints have been stopping at around each time 5%. So far i have tried updating klipper services and changing the cable that connects to the printer. Please help me!

---

<div class="post-metadata">

**Author:** ![Dragi2k](https://avatars.discourse-cdn.com/v4/letter/d/65b543/32.png) [@Dragi2k](https://klipper.discourse.group/u/Dragi2k)\
**Post date:** [February 25, 2023, 1:09pm UTC](https://klipper.discourse.group/t/klipper-shutting-down-during-print/6844/2 "2023-02-25T13:09:28Z")

</div>

> [@Raghav](#):
>
> nd changing the cable that connects to the printer. Please help me!

on the log it looks like that your wire to the mcu is bad, it looses connection with the board.

Do you have another wire to test it ?

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [February 25, 2023, 10:01pm UTC](https://klipper.discourse.group/t/klipper-shutting-down-during-print/6844/3 "2023-02-25T22:01:31Z")

</div>

See [Got EOF when reading from device](https://klipper.discourse.group/t/got-eof-when-reading-from-device/6638/1)

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [July 25, 2024, 4:11pm UTC](https://klipper.discourse.group/t/klipper-shutting-down-during-print/6844/4 "2024-07-25T16:11:13Z")

</div>