# Klipper shutting down mid print

**URL:** <https://klipper.discourse.group/t/klipper-shutting-down-mid-print/18372>\
**Category:** General Discussion\
**Created:** [August 20, 2024, 4:25am UTC](https://klipper.discourse.group/t/klipper-shutting-down-mid-print/18372 "2024-08-20T04:25:00Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![brandon1](https://avatars.discourse-cdn.com/v4/letter/b/ea666f/32.png) [@brandon1](https://klipper.discourse.group/u/brandon1)\
**Post date:** [August 20, 2024, 4:25am UTC](https://klipper.discourse.group/t/klipper-shutting-down-mid-print/18372/1 "2024-08-20T04:25:00Z")

</div>

### Basic Information:

Printer Model: Anycubic kobra 2  
 MCU / Printerboard: Trigorrila pro b 1.0.2  
 Host / SBC Rpi 3b+  
 klippy.log  
[ezyzip.zip](https://klipper.discourse.group/uploads/short-url/3xhOBrjnq348N4HSpv8PQDehMbZ.zip) (3.7 MB)

_Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_  
_ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _

### Describe your issue:

Klipper randomly shuts down. it is not the first time it has shut down while printing causing failed prints and wasted plastic. im typicaly not at my printer while this happens but im getting told that nothing is happing when it has shut down

Never happend on shorter prints \<1h long

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [August 20, 2024, 8:37am UTC](https://klipper.discourse.group/t/klipper-shutting-down-mid-print/18372/2 "2024-08-20T08:37:11Z")

</div>

See [Timeout with MCU / Lost communication with MCU](https://klipper.discourse.group/t/timeout-with-mcu-lost-communication-with-mcu/6639)

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [October 19, 2024, 8:37am UTC](https://klipper.discourse.group/t/klipper-shutting-down-mid-print/18372/3 "2024-10-19T08:37:43Z")

</div>

Closed on October 19, 2024, 8:37am UTC

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.