# Klipper state: Shutdown Running TMC5160 BTT Octopus 1.1

**URL:** <https://klipper.discourse.group/t/klipper-state-shutdown-running-tmc5160-btt-octopus-1-1/3102>\
**Category:** General Discussion\
**Created:** [June 8, 2022, 10:41am UTC](https://klipper.discourse.group/t/klipper-state-shutdown-running-tmc5160-btt-octopus-1-1/3102 "2022-06-08T10:41:06Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [July 21, 2022, 2:41pm UTC](https://klipper.discourse.group/t/klipper-state-shutdown-running-tmc5160-btt-octopus-1-1/3102/9 "2022-07-21T14:41:20Z")

</div>

Refer to: [TMC drivers - Klipper documentation](https://www.klipper3d.org/TMC_Drivers.html#common-questions) and [TMC 'extruder' reports error: GSTAT: 00000001 reset=1(reset - #39 by Sineos](https://klipper.discourse.group/t/tmc-extruder-reports-error-gstat-00000001-reset-1-reset/1156/39)

Most likely some hardware issue

---

_[View the full topic](https://klipper.discourse.group/t/klipper-state-shutdown-running-tmc5160-btt-octopus-1-1/3102)._