# KlipperScreen adjust existing menu

**URL:** <https://klipper.discourse.group/t/klipperscreen-adjust-existing-menu/16309>\
**Category:** KlipperScreen\
**Created:** [May 7, 2024, 10:17am UTC](https://klipper.discourse.group/t/klipperscreen-adjust-existing-menu/16309 "2024-05-07T10:17:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mjfsch](https://avatars.discourse-cdn.com/v4/letter/m/cc9497/32.png) [@mjfsch](https://klipper.discourse.group/u/mjfsch)\
**Post date:** [May 7, 2024, 10:17am UTC](https://klipper.discourse.group/t/klipperscreen-adjust-existing-menu/16309/1 "2024-05-07T10:17:29Z")

</div>

Hi,

Is it possible to add buttons to existing menus using the config file?  
Readthedocs seems to suggest you can add your own menus, but doesn’t seem to cover modifying pre-defined ones.

Specifically, i would like to add a “cut” button on the extrude panel to trigger a filament cutter (i am thinking ahead to what would be required for installing CoPrint3D’s Chromahead whenever they might ship)

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [July 6, 2024, 10:18am UTC](https://klipper.discourse.group/t/klipperscreen-adjust-existing-menu/16309/2 "2024-07-06T10:18:07Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.