# "klippy disconnect" as soon as print finishes no error message **URL:** \ **Category:** General Discussion\ **Created:** [March 8, 2024, 5:12pm UTC](https://klipper.discourse.group/t/klippy-disconnect-as-soon-as-print-finishes-no-error-message/14760 "2024-03-08T17:12:14Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![Autosri](https://avatars.discourse-cdn.com/v4/letter/a/3ec8ea/32.png) [@Autosri](https://klipper.discourse.group/u/Autosri)\ **Post date:** [March 8, 2024, 5:12pm UTC](https://klipper.discourse.group/t/klippy-disconnect-as-soon-as-print-finishes-no-error-message/14760/1 "2024-03-08T17:12:14Z")
### Basic Information: Printer Model: ender3v2 MCU / Printerboard:btt mini e3 v3 `klippy.log` [klippy (6).log](https://klipper.discourse.group/uploads/short-url/4WcBT5FbTir3sp11gHzWEJYbEVs.log) (1001.8 KB) [moonraker (1).log](https://klipper.discourse.group/uploads/short-url/gWoRqslqN2Yhm9XTh1Me7ZGIOsy.log) (57.8 KB) _Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_ _ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _ ### Describe your issue: … im a new user to klipper and have got a bit stuck after making some modifications adding a enclosure heater, i can start and run a print just fine and it works and completes the print but as soon as it finishes it just kills klipper and turns off the power relay , it doesnt run the end\_print macro it just dies and sticks the nozzle in the print ive since uncommented everything ive added to do with the enclosure heater and it still does the same thing ive had a read through the logs but the honest truth is i havnt a clue what im actually looking it it used to work and finish the print,present the print,cool everything off then auto shut off the power relay please help as im well out my depth here ---
**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\ **Post date:** [March 8, 2024, 6:22pm UTC](https://klipper.discourse.group/t/klippy-disconnect-as-soon-as-print-finishes-no-error-message/14760/2 "2024-03-08T18:22:16Z")
Not 100% sure, but it looks like Moonraker is shutting down Klipper due to the `[power printer]` settings. ---
**Author:** ![Autosri](https://avatars.discourse-cdn.com/v4/letter/a/3ec8ea/32.png) [@Autosri](https://klipper.discourse.group/u/Autosri)\ **Post date:** [March 8, 2024, 6:45pm UTC](https://klipper.discourse.group/t/klippy-disconnect-as-soon-as-print-finishes-no-error-message/14760/3 "2024-03-08T18:45:14Z")
Oh that’s very odd as that part of it worked fine before Il uncomment all of it see if it still does it and if it doesn’t il try and narrow it down So nothing else jumps out as being obviously wrong to you then Thanks for having a look ---
**Author:** ![Autosri](https://avatars.discourse-cdn.com/v4/letter/a/3ec8ea/32.png) [@Autosri](https://klipper.discourse.group/u/Autosri)\ **Post date:** [March 9, 2024, 6:26pm UTC](https://klipper.discourse.group/t/klippy-disconnect-as-soon-as-print-finishes-no-error-message/14760/4 "2024-03-09T18:26:16Z")
Thank you for your help it’s all sorted now I think when I was fitting the enclosure heater code I must have messed up and printer.cfg must have resorted to a backup or something Problem is that clashed with one of the end\_print macros causing it to to shutdown ---
**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\ **Post date:** [May 8, 2024, 6:26pm UTC](https://klipper.discourse.group/t/klippy-disconnect-as-soon-as-print-finishes-no-error-message/14760/5 "2024-05-08T18:26:44Z")
This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.