# Klippy\_shutdown mid-print on my Ender 3 **URL:** \ **Category:** General Discussion\ **Created:** [August 18, 2024, 11:02am UTC](https://klipper.discourse.group/t/klippy-shutdown-mid-print-on-my-ender-3/18341 "2024-08-18T11:02:38Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![urio](https://avatars.discourse-cdn.com/v4/letter/u/e68b1a/32.png) [@urio](https://klipper.discourse.group/u/urio)\ **Post date:** [August 18, 2024, 11:02am UTC](https://klipper.discourse.group/t/klippy-shutdown-mid-print-on-my-ender-3/18341/1 "2024-08-18T11:02:38Z")
### Basic Information: Printer Model: Ender 3 MCU / Printerboard: 4.2.2 This has happened to me 2 times till now. First time was yesterday after 5h into the print, and I saw some moonrake errors. Fixed them and thought that my problem is fixed. Starting the same print, going well into 10h mark and bam, it stops again. I didn’t manage to find the klippy.log (it was empty somehow when I downloaded it) the second time I was printing, but I will attach below the klippy.log file from the first failed print. Thank you in advance kind stranger for helping a rando’ online! klippy.log → [Dropbox](https://www.dropbox.com/scl/fi/g92xqcpl4narpw0qynaxo/klippy.log?rlkey=qp7hmzdiyq7unzk3psb42xe90&st=t2a6n8v2&dl=0) ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [August 18, 2024, 11:23am UTC](https://klipper.discourse.group/t/klippy-shutdown-mid-print-on-my-ender-3/18341/2 "2024-08-18T11:23:29Z")
Hello @urio ! Please upload the klippy.log here, not on a fileserver. ---
**Author:** ![urio](https://avatars.discourse-cdn.com/v4/letter/u/e68b1a/32.png) [@urio](https://klipper.discourse.group/u/urio)\ **Post date:** [August 18, 2024, 1:19pm UTC](https://klipper.discourse.group/t/klippy-shutdown-mid-print-on-my-ender-3/18341/3 "2024-08-18T13:19:22Z")
Sorry, didn’t know the process. First time posting. Anyways here’s the klippy.log: [klippy.zip](https://klipper.discourse.group/uploads/short-url/sagapSeBYKdSZePxr5CujuR1YAj.zip) (1.6 MB) ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [August 18, 2024, 1:39pm UTC](https://klipper.discourse.group/t/klippy-shutdown-mid-print-on-my-ender-3/18341/4 "2024-08-18T13:39:37Z")
The prime issue is: ```auto Got EOF when reading from device ``` You may look here: > [@Got EOF when reading from device](https://klipper.discourse.group/t/got-eof-when-reading-from-device/6638): > > Got EOF when reading from device Background This is actually an error raised by Linux operating system (OS) of the host and only reported by Klipper. It indicated that the contact to an attached hardware (mostly the MCU in this case) is lost. This can happen when the USB port is reset or the OS thinks the hardware has been disconnected. This error often appears in conjunction with the [Timeout with MCU / Lost communication with MCU](https://klipper.discourse.group/t/timeout-with-mcu-lost-communication-with-mcu/6639/1) errors Reasons Unreliable connection between the printer-bo… ---
**Author:** ![urio](https://avatars.discourse-cdn.com/v4/letter/u/e68b1a/32.png) [@urio](https://klipper.discourse.group/u/urio)\ **Post date:** [August 18, 2024, 2:09pm UTC](https://klipper.discourse.group/t/klippy-shutdown-mid-print-on-my-ender-3/18341/5 "2024-08-18T14:09:55Z")
Thank you for the insight! You helped me so much! ---
**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\ **Post date:** [September 18, 2024, 12:10am UTC](https://klipper.discourse.group/t/klippy-shutdown-mid-print-on-my-ender-3/18341/6 "2024-09-18T00:10:39Z")
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.