# Kobra 2 Pro Download/Upload Config **URL:** \ **Category:** General Discussion\ **Created:** [January 4, 2025, 2:56pm UTC](https://klipper.discourse.group/t/kobra-2-pro-download-upload-config/21131 "2025-01-04T14:56:25Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![Dutlin](https://avatars.discourse-cdn.com/v4/letter/d/22d042/32.png) [@Dutlin](https://klipper.discourse.group/u/Dutlin)\ **Post date:** [January 4, 2025, 2:56pm UTC](https://klipper.discourse.group/t/kobra-2-pro-download-upload-config/21131/1 "2025-01-04T14:56:25Z")
[Printer Model: Kobra 2 Pro I tried to use the download cfg gcode and it is not putting the file onto my USB. My printer is running the v3.0.5 firmware and has not been modified at all. Are there steps I need to take to be able for this to work? ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [January 4, 2025, 3:19pm UTC](https://klipper.discourse.group/t/kobra-2-pro-download-upload-config/21131/2 "2025-01-04T15:19:48Z")
Hello @Dutlin ! Sorry, I can’t follow. > [@Dutlin](#): > > cfg gcode What cfg code? > [@Dutlin](#): > > download From where? > [@Dutlin](#): > > it What is it? > [@Dutlin](#): > > v3.0.5 firmware What Firmware? Klipper is version 0.12.0 You also may read here: [3D Printers with Preinstalled and Modified Klipper Versions](https://klipper.discourse.group/t/3d-printers-with-preinstalled-and-modified-klipper-versions/20467/1) ---
**Author:** ![Dutlin](https://avatars.discourse-cdn.com/v4/letter/d/22d042/32.png) [@Dutlin](https://klipper.discourse.group/u/Dutlin)\ **Post date:** [January 4, 2025, 3:35pm UTC](https://klipper.discourse.group/t/kobra-2-pro-download-upload-config/21131/3 "2025-01-04T15:35:13Z")
Link here to forum post with more info on the Anycubic kobra 2 work. > [@Printer.cfg for Anycubic Kobra 2 Plus/Pro/Max](https://klipper.discourse.group/t/printer-cfg-for-anycubic-kobra-2-plus-pro-max/11658/107): > > Yes. Hidden Mxxxx G commands is working as expected! At least that is investigated by me till now. You can try it by yourself. Copy contents of attached zip into USB disk, insert into Kobra and “print” any of included gcode files: 1\_download\_cfg.gcode - it will download full actual printer.cfg and unmodifiable.cfg to the root of USB disk. 2\_upload\_cfg.gcode - it will upload printer.cfg from your USB disk into printer and completely replace it. So it is possible now I think to modify any contro… The firmware for the kobra 2 pro is locked down and they managed to find a way to pull the config file and also rewrite it. This is the only way to modify the modified klipper settings on this printer. The files linked are supposed to when run download the printer.cfg file onto the USB so that it can be read/modified. ---
**Author:** ![MafiZed](https://avatars.discourse-cdn.com/v4/letter/m/ba8739/32.png) [@MafiZed](https://klipper.discourse.group/u/MafiZed)\ **Post date:** [January 22, 2025, 2:57am UTC](https://klipper.discourse.group/t/kobra-2-pro-download-upload-config/21131/4 "2025-01-22T02:57:00Z")
So format the usb, put the download/upload gcodes on there, turn on printer and select usb then select download.gcode, hit print, hit cancel once the print screen pops up, remove usb and insert into pc and it should be there. If it’s not there, try manually writing the gcode file yourself, or re download it, if that fails throw the printer off the balcony in disgust and see if that fixes it ---
**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\ **Post date:** [March 23, 2025, 2:57am UTC](https://klipper.discourse.group/t/kobra-2-pro-download-upload-config/21131/5 "2025-03-23T02:57:07Z")
Closed on March 23, 2025, 2:57am UTC This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.