# Kobra2Pro with newer Mainboart "Solved"

**URL:** <https://klipper.discourse.group/t/kobra2pro-with-newer-mainboart-solved/21587>\
**Category:** General Discussion\
**Created:** [January 23, 2025, 8:37pm UTC](https://klipper.discourse.group/t/kobra2pro-with-newer-mainboart-solved/21587 "2025-01-23T20:37:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![moosbewohner](https://avatars.discourse-cdn.com/v4/letter/m/a6a055/32.png) [@moosbewohner](https://klipper.discourse.group/u/moosbewohner)\
**Post date:** [January 23, 2025, 8:37pm UTC](https://klipper.discourse.group/t/kobra2pro-with-newer-mainboart-solved/21587/1 "2025-01-23T20:37:09Z")

</div>

Hello i Have the  
Kobra2Pro Printer direct from AC with a newer Mainbord the Mainboart printing Spe\_B\_V1.0.5 🤔  
with a Firmware Version 3.1.2.3 and have a Rockchip and HC32F460 chip  
(i have a older Board with V1.0.0 and this is root und have webserver)

I have already searched a lot and found a lot of information, so the firmware file looks exactly like the one from Kobra3 and is a password protected zip file with setup.tar.gz file in it with I have already been able to create backups using various .swu files. My goal would be to create a working CFW like with Kobra3, but I haven’t quite managed to do that, something is different!

this is the CFW from K3

> **[GitHub - utkabobr/DuckPro-Kobra3: CFW for Anycubic Kobra 3](https://github.com/utkabobr/DuckPro-Kobra3)**
>
> CFW for Anycubic Kobra 3

this is the firmwarefile from Anycubic K2Pro  
[https://drive.google.com/drive/folders/1nFJAXBey12f40RSBXfZcdZZS--gQ0zXd](https://drive.google.com/drive/folders/1nFJAXBey12f40RSBXfZcdZZS--gQ0zXd)  
the password is always

U2FsdGVkX19deTfqpXHZnB5GeyQ/dtlbHjkUnwgCi+w=

have everyone other infos or can help i not a profi 😇

**UPDATE:**  
jbatonnet have make a very good cfw for the K3 and we have modificate the Code!  
The K2Pro with the Firmware 3.1.2.3 (PCBboard V. 1.0.5) is supportet  
Have Fluidd,Mainsail,SSH 🥳

> **[GitHub - jbatonnet/Rinkhals: Custom firmware for the Anycubic Kobra series of...](https://github.com/jbatonnet/Rinkhals)**
>
> Custom firmware for the Anycubic Kobra series of 3D printers

thx  
moosbewohner

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [March 24, 2025, 8:37pm UTC](https://klipper.discourse.group/t/kobra2pro-with-newer-mainboart-solved/21587/2 "2025-03-24T20:37:38Z")

</div>

Closed on March 24, 2025, 8:37pm UTC

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.
