# Macro with temperature offset

**URL:** <https://klipper.discourse.group/t/macro-with-temperature-offset/4714>\
**Category:** Macros\
**Created:** [November 1, 2022, 7:09am UTC](https://klipper.discourse.group/t/macro-with-temperature-offset/4714 "2022-11-01T07:09:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Peurif](https://avatars.discourse-cdn.com/v4/letter/p/c57346/32.png) [@Peurif](https://klipper.discourse.group/u/Peurif)\
**Post date:** [November 1, 2022, 7:09am UTC](https://klipper.discourse.group/t/macro-with-temperature-offset/4714/1 "2022-11-01T07:09:21Z")

</div>

Hi,

Ask if this is possible. I guess so, and how it would be done

I want to include in my macro END\_PRINT, among other things, that when I finish printing, I lower the current temperature of the Hotend, about 30 degrees, and then retract the filament

Where I can find info?

Thx

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [November 1, 2022, 7:26am UTC](https://klipper.discourse.group/t/macro-with-temperature-offset/4714/2 "2022-11-01T07:26:55Z")

</div>

You may have a look on this:

> <https://github.com/Klipper3d/klipper/blob/master/config/sample-macros.cfg>

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [January 4, 2026, 10:04pm UTC](https://klipper.discourse.group/t/macro-with-temperature-offset/4714/3 "2026-01-04T22:04:35Z")

</div>