# Manta E3EZ microprobe code

**URL:** <https://klipper.discourse.group/t/manta-e3ez-microprobe-code/15776>\
**Category:** General Discussion\
**Created:** [April 14, 2024, 7:15pm UTC](https://klipper.discourse.group/t/manta-e3ez-microprobe-code/15776 "2024-04-14T19:15:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![proxima](https://avatars.discourse-cdn.com/v4/letter/p/65b543/32.png) [@proxima](https://klipper.discourse.group/u/proxima)\
**Post date:** [April 14, 2024, 7:15pm UTC](https://klipper.discourse.group/t/manta-e3ez-microprobe-code/15776/1 "2024-04-14T19:15:32Z")

</div>

### Basic Information:

Printer Model: Ender 5  
 MCU / Printerboard: Manta e3ez with cb1  
 Host / SBC mainsail  
 klippy.log  
[klippy (1).log](https://klipper.discourse.group/uploads/short-url/qlVkXwecLv5LWBWG4VslA0s9py8.log) (165.2 KB)

_Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_  
_ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _

### Describe your issue:

I have updated the printer.cfg file as the Bigtreetech git hub say but i still get errors:

Klipper reports: ERROR

Source contains parsing errors: ‘/home/biqu/printer\_data/config/printer.cfg’  
[line 227]: ‘Probe\_Deploy\n’  
[line 228]: ‘G4 P500 \n’  
[line 230]: ‘Probe\_Stow\n’

Once the underlying issue is corrected, use the “RESTART”  
command to reload the config and restart the host software.  
Printer is halted

Can somebody help me solve this?  
Can u check the filament runout sensore code as well?  
I’m new to this an I cant seam to find a prewriten file for the ender 5 with everything in it. 🙂  
…

---

<div class="post-metadata">

**Author:** ![gaolst](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/gaolst/32/10026_2.png) [@gaolst](https://klipper.discourse.group/u/gaolst)\
**Post date:** [April 16, 2024, 2:20am UTC](https://klipper.discourse.group/t/manta-e3ez-microprobe-code/15776/2 "2024-04-16T02:20:05Z")

</div>

Send you printer.cfg file with introduced changes,  
klipper have trouble to parse it,  
most probably you put something there inappropriate.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [June 15, 2024, 2:20am UTC](https://klipper.discourse.group/t/manta-e3ez-microprobe-code/15776/3 "2024-06-15T02:20:09Z")

</div>

Closed on June 15, 2024, 2:20am UTC

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.