# MANTA M5P Flashing and Running Custom Firmware

**URL:** <https://klipper.discourse.group/t/manta-m5p-flashing-and-running-custom-firmware/24269>\
**Category:** General Discussion\
**Created:** [July 17, 2025, 1:58am UTC](https://klipper.discourse.group/t/manta-m5p-flashing-and-running-custom-firmware/24269 "2025-07-17T01:58:32Z")\
**Posts on this page:** 1\
**Showing post:** 59

<div class="post-metadata">

**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://klipper.discourse.group/u/cardoc)\
**Post date:** [September 19, 2025, 3:49am UTC](https://klipper.discourse.group/t/manta-m5p-flashing-and-running-custom-firmware/24269/59 "2025-09-19T03:49:18Z")

</div>

> [@Change to coordinates exported as status variables](https://klipper.discourse.group/t/change-to-coordinates-exported-as-status-variables/24869/1):
>
> However, now a `G1` move can have many additional axes (eg, XYZERPNU)

That’s not how I read it.  
I’d look at the code except I’d not understand 1% of it.

---

_[View the full topic](https://klipper.discourse.group/t/manta-m5p-flashing-and-running-custom-firmware/24269)._