# Moonraker issue after fresh install

**URL:** <https://klipper.discourse.group/t/moonraker-issue-after-fresh-install/6861>\
**Category:** General Discussion\
**Created:** [February 24, 2023, 8:02am UTC](https://klipper.discourse.group/t/moonraker-issue-after-fresh-install/6861 "2023-02-24T08:02:53Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![rlarudqls630](https://avatars.discourse-cdn.com/v4/letter/r/2bfe46/32.png) [@rlarudqls630](https://klipper.discourse.group/u/rlarudqls630)\
**Post date:** [February 24, 2023, 8:02am UTC](https://klipper.discourse.group/t/moonraker-issue-after-fresh-install/6861/1 "2023-02-24T08:02:53Z")

</div>

### Basic Information:

Printer Model: Voron 2.4  
 MCU / Printerboard: Monster 8  
 `klippy.log`  
[klippy.log](https://klipper.discourse.group/uploads/short-url/sshlTyVWwZlQhkle1X36fWL1AxH.log) (2.9 MB)

### Describe your issue:

I just installed fresh klipper and moonraker but keep getting this message after changing the path to recomanded path.  
How do i fix this?

- GCode path received from Klipper does not match expected location.

Received: ‘/home/pi/gcode\_files’  
Expected: ‘/home/pi/printer\_data/gcodes’

Modify the [virtual\_sdcard] section Klipper’s configuration to correct this error.

[virtual\_sdcard]  
path: /home/pi/printer\_data/gcodes

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [February 24, 2023, 8:53am UTC](https://klipper.discourse.group/t/moonraker-issue-after-fresh-install/6861/2 "2023-02-24T08:53:03Z")

</div>

Your klippy.log shows:

```auto
[virtual_sdcard]
path = ~/gcode_files
on_error_gcode = CANCEL_PRINT

```

Fix this in `printer.cfg` to the new path

---

<div class="post-metadata">

**Author:** ![rlarudqls630](https://avatars.discourse-cdn.com/v4/letter/r/2bfe46/32.png) [@rlarudqls630](https://klipper.discourse.group/u/rlarudqls630)\
**Post date:** [February 24, 2023, 9:31am UTC](https://klipper.discourse.group/t/moonraker-issue-after-fresh-install/6861/3 "2023-02-24T09:31:54Z")

</div>

I did that and still showing the same error

---

<div class="post-metadata">

**Author:** ![rlarudqls630](https://avatars.discourse-cdn.com/v4/letter/r/2bfe46/32.png) [@rlarudqls630](https://klipper.discourse.group/u/rlarudqls630)\
**Post date:** [February 24, 2023, 9:34am UTC](https://klipper.discourse.group/t/moonraker-issue-after-fresh-install/6861/4 "2023-02-24T09:34:34Z")

</div>

just checked again and for some reason klipper.log is not updating but  
i fixed printer.cfg to new path

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [February 24, 2023, 9:34am UTC](https://klipper.discourse.group/t/moonraker-issue-after-fresh-install/6861/5 "2023-02-24T09:34:57Z")

</div>

According to the `klippy.log` attached above, you did not.  
Did you edit the correct file?  
In doubt attach a new klippy.log or even better check for yourself. The `klippy.log` always contains the full configuration. Start from the end of the file until you reach your configuration. This will then be the last information

---

<div class="post-metadata">

**Author:** ![rlarudqls630](https://avatars.discourse-cdn.com/v4/letter/r/2bfe46/32.png) [@rlarudqls630](https://klipper.discourse.group/u/rlarudqls630)\
**Post date:** [February 24, 2023, 9:38am UTC](https://klipper.discourse.group/t/moonraker-issue-after-fresh-install/6861/6 "2023-02-24T09:38:13Z")

</div>

just checked it again  
printer.cfg is changed but klipper.log is not changing

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [February 24, 2023, 9:39am UTC](https://klipper.discourse.group/t/moonraker-issue-after-fresh-install/6861/7 "2023-02-24T09:39:47Z")

</div>

Not possible. Verify your paths / file locations

---

<div class="post-metadata">

**Author:** ![rlarudqls630](https://avatars.discourse-cdn.com/v4/letter/r/2bfe46/32.png) [@rlarudqls630](https://klipper.discourse.group/u/rlarudqls630)\
**Post date:** [February 24, 2023, 9:40am UTC](https://klipper.discourse.group/t/moonraker-issue-after-fresh-install/6861/8 "2023-02-24T09:40:37Z")

</div>

I was stupid. sry  
there wer two virtual\_sdcard section

solved  
Thank you so much

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [October 26, 2024, 5:52am UTC](https://klipper.discourse.group/t/moonraker-issue-after-fresh-install/6861/9 "2024-10-26T05:52:05Z")

</div>