# Motherboard fan: can I switch it off?

**URL:** <https://klipper.discourse.group/t/motherboard-fan-can-i-switch-it-off/7517>\
**Category:** General Discussion\
**Created:** [March 29, 2023, 8:21am UTC](https://klipper.discourse.group/t/motherboard-fan-can-i-switch-it-off/7517 "2023-03-29T08:21:15Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [March 29, 2023, 1:52pm UTC](https://klipper.discourse.group/t/motherboard-fan-can-i-switch-it-off/7517/4 "2023-03-29T13:52:16Z")

</div>

No.

You may have a look on this:

> [@Klipper Architecture / Ecosystem](https://klipper.discourse.group/t/klipper-architecture-ecosystem/6313):
>
> Klipper Architecture / Ecosystem Calling Klipper a 3D printer firmware is not complete to its full extent. In fact it is a 3D printing application with an associated ecosystem. The following overview shows how the different aspects interact. Only the red boxes is Klipper in its original sense, the other boxes are independent products forming the entire ecosystem. Klipper Host The core of the Klipper environment Typically running on a Single Board Computer (SBC), …

---

_[View the full topic](https://klipper.discourse.group/t/motherboard-fan-can-i-switch-it-off/7517)._
