# Move out of range: 5.000 -20.250 5.000 \[0.000\]

**URL:** <https://klipper.discourse.group/t/move-out-of-range-5-000-20-250-5-000-0-000/19036>\
**Category:** General Discussion\
**Created:** [September 26, 2024, 6:41am UTC](https://klipper.discourse.group/t/move-out-of-range-5-000-20-250-5-000-0-000/19036 "2024-09-26T06:41:22Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [September 26, 2024, 6:48am UTC](https://klipper.discourse.group/t/move-out-of-range-5-000-20-250-5-000-0-000/19036/2 "2024-09-26T06:48:43Z")

</div>

Hello @Samm_Adamms !

Sorry, but we do not support the K1 because Creality missformed Klipper in a way we can not comprehend.

* * *

Hint to your issue:

Please verify the print bed limits and the X/Y offsets of the BLtouch

> [@Understanding X and Y Axes Limits and Homing](https://klipper.discourse.group/t/understanding-x-and-y-axes-limits-and-homing/10779):
>
> The X and Y Axis Klipper needs to know from its printer.cfg settings how far the X and Y axes can safely move without hitting the printer’s frame. It also needs to know where the origin (X=0 / Y=0) is. This origin is the beginning of the usable printer bed. In the following, we assume a Cartesian printer that follows the conventions of a [Cartesian Coordinate System](https://en.wikipedia.org/wiki/Cartesian_coordinate_system). This is also the reason why it is a quasi-standard to define the origin as the left-front corner of the bed. This way, all logic…

---

_[View the full topic](https://klipper.discourse.group/t/move-out-of-range-5-000-20-250-5-000-0-000/19036)._