# Move out of range error / Klipper / Cura

**URL:** <https://klipper.discourse.group/t/move-out-of-range-error-klipper-cura/21563>\
**Category:** General Discussion\
**Created:** [January 22, 2025, 6:30pm UTC](https://klipper.discourse.group/t/move-out-of-range-error-klipper-cura/21563 "2025-01-22T18:30:46Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [January 22, 2025, 6:55pm UTC](https://klipper.discourse.group/t/move-out-of-range-error-klipper-cura/21563/2 "2025-01-22T18:55:35Z")

</div>

Hello @3dpjunkie

You have to align

- bed size
- probe offset
- bed mesh

> [@Understanding X and Y Axes Limits and Homing](https://klipper.discourse.group/t/understanding-x-and-y-axes-limits-and-homing/10779/1):
>
> The X and Y Axis Klipper needs to know from its printer.cfg settings how far the X and Y axes can safely move without hitting the printer’s frame. It also needs to know where the origin (X=0 / Y=0) is. This origin is the beginning of the usable printer bed. In the following, we assume a Cartesian printer that follows the conventions of a [Cartesian Coordinate System](https://en.wikipedia.org/wiki/Cartesian_coordinate_system). This is also the reason why it is a quasi-standard to define the origin as the left-front corner of the bed. This way, all logic…

Also:

```auto
Git version: 'v0.12.0-410-gcf3b0475d-dirty'
Untracked files: klippy/extras/auto_speed.py

```

---

_[View the full topic](https://klipper.discourse.group/t/move-out-of-range-error-klipper-cura/21563)._