# Move out of range error

**URL:** <https://klipper.discourse.group/t/move-out-of-range-error/11651>\
**Category:** General Discussion\
**Created:** [November 17, 2023, 9:58pm UTC](https://klipper.discourse.group/t/move-out-of-range-error/11651 "2023-11-17T21:58:48Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [November 17, 2023, 10:20pm UTC](https://klipper.discourse.group/t/move-out-of-range-error/11651/2 "2023-11-17T22:20:34Z")

</div>

See [Move out of range: X Y Z [E]](https://klipper.discourse.group/t/move-out-of-range-x-y-z-e/6637) and [Installation - Klipper documentation](https://www.klipper3d.org/Installation.html#configuring-octoprint-to-use-klipper)

> [@pinggi](#):
>
> Can I set this behavior in Klipper or Octoprint?

No and not needed. Get your settings correct (one time action) and you will have no issue.

---

_[View the full topic](https://klipper.discourse.group/t/move-out-of-range-error/11651)._