# Move Out Of Range Issue pls help - Bed Mesh Calibrate

**URL:** <https://klipper.discourse.group/t/move-out-of-range-issue-pls-help-bed-mesh-calibrate/22449>\
**Category:** General Discussion\
**Created:** [March 12, 2025, 5:31pm UTC](https://klipper.discourse.group/t/move-out-of-range-issue-pls-help-bed-mesh-calibrate/22449 "2025-03-12T17:31:03Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Butts4ggingt0n](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/butts4ggingt0n/32/17724_2.png) [@Butts4ggingt0n](https://klipper.discourse.group/u/Butts4ggingt0n)\
**Post date:** [March 12, 2025, 6:16pm UTC](https://klipper.discourse.group/t/move-out-of-range-issue-pls-help-bed-mesh-calibrate/22449/4 "2025-03-12T18:16:38Z")

</div>

I have done this but still getting this now

Move out of range: 225.150 10.000 20.000 [0.000]

- he easiest process to determine the proper starting and ending coordinates for `mesh_min` / `mesh_max` is:
  1. Home the printer
  2. Move the head towards the left-front corner until you have positioned the probe’s tip as close as possible to this left-front edge
  3. Issue the `GET_POSITION` command and get the nozzle coordinates
  4. Correct the obtained X value with the `x_offset` and the Y value with the `y_offset` (mind the algebraic sign)
  5. Enter the corrected values as `mesh_min`
  6. Repeat steps 2. to 5., but this time place the probe’s tip as close as possible to the back-right corner and use the result for `mesh_max`

- Setting these coordinates wrongly typically will lead to a [Move out of range: X Y Z [E]](https://klipper.discourse.group/t/move-out-of-range-x-y-z-e/6637) error

---

_[View the full topic](https://klipper.discourse.group/t/move-out-of-range-issue-pls-help-bed-mesh-calibrate/22449)._