# Multiple Instances **URL:** \ **Category:** General Discussion\ **Created:** [January 20, 2024, 2:08am UTC](https://klipper.discourse.group/t/multiple-instances/13318 "2024-01-20T02:08:22Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![HeadAchesRUs](https://avatars.discourse-cdn.com/v4/letter/h/eb9ed0/32.png) [@HeadAchesRUs](https://klipper.discourse.group/u/HeadAchesRUs)\ **Post date:** [January 20, 2024, 2:08am UTC](https://klipper.discourse.group/t/multiple-instances/13318/1 "2024-01-20T02:08:22Z")
I am stuck, been at it for days Dual Printers: SV01PRO-SKR 3 EZ & SV04IDEX-Creality 5.2.1 Both Printers can connect and operate on a single instance. But when I uninstall everything via kiauh then reinstall with 2 instances for Klipper and Moonraker…It says connected to both but it seems both instances are connected to one printer. Ex: If I command bed heater to 60 on the IDEX instance klipper shows both printers set to the same temp and only the SV01 responds. Klippy log shows error2 for the IDEX. I am using the same MCU path as I did with each printer loaded independently. Another interesting thing is the klippy log for both instances are identical I also get this error on the SV01PRO instance only. This really Puzzles me ![moonraker_error](https://global.discourse-cdn.com/free1/uploads/klipper/original/2X/2/286f1b693d4d7f3a51e835f847aaf57ec7ecc599.jpeg) Any pointers would be greatly appreciated [klippy (5).log](https://klipper.discourse.group/uploads/short-url/cAtvSbugd7wATjYnzDmwnZak5DR.log) (372.4 KB) ---
**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\ **Post date:** [March 20, 2024, 2:08am UTC](https://klipper.discourse.group/t/multiple-instances/13318/2 "2024-03-20T02:08:35Z")
This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.