# Must home axis first: 0.000 0.000 5.000 \[0.000\]

**URL:** <https://klipper.discourse.group/t/must-home-axis-first-0-000-0-000-5-000-0-000/22359>\
**Category:** General Discussion\
**Created:** [March 5, 2025, 8:32pm UTC](https://klipper.discourse.group/t/must-home-axis-first-0-000-0-000-5-000-0-000/22359 "2025-03-05T20:32:38Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![bcrazycramer](https://avatars.discourse-cdn.com/v4/letter/b/ed655f/32.png) [@bcrazycramer](https://klipper.discourse.group/u/bcrazycramer)\
**Post date:** [March 5, 2025, 8:32pm UTC](https://klipper.discourse.group/t/must-home-axis-first-0-000-0-000-5-000-0-000/22359/1 "2025-03-05T20:32:39Z")

</div>

### Basic Information:

Printer Model: HEVORT  
 MCU / Printerboard: Octopus Pro V1.0  
 Host / SBC Raspberry Pi 4  
 klippy.log  
[klippy (03-05-2025).log](https://klipper.discourse.group/uploads/short-url/pXd69HVKmZeSB7ahwoCLIkTliH1.log) (49.4 KB)

### Describe your issue:

I can’t home any axis. It tells me I must home axis first. This happened after updating the firmware that the update manager showed needed updating.

Beacon V2.0.0-21-gee5d7709  
Klipper V0.12.0-451-g730e5951  
Mainsail v2.13.2  
Moonraker v0.9.3-66-g18f3da59

Thanks,  
Brandon

---

<div class="post-metadata">

**Author:** ![dilectus](https://avatars.discourse-cdn.com/v4/letter/d/7ba0ec/32.png) [@dilectus](https://klipper.discourse.group/u/dilectus)\
**Post date:** [March 5, 2025, 9:28pm UTC](https://klipper.discourse.group/t/must-home-axis-first-0-000-0-000-5-000-0-000/22359/2 "2025-03-05T21:28:37Z")

</div>

Have you tried just issuing G28 gcode via console (without any macros)?

---

<div class="post-metadata">

**Author:** ![bcrazycramer](https://avatars.discourse-cdn.com/v4/letter/b/ed655f/32.png) [@bcrazycramer](https://klipper.discourse.group/u/bcrazycramer)\
**Post date:** [March 6, 2025, 12:44am UTC](https://klipper.discourse.group/t/must-home-axis-first-0-000-0-000-5-000-0-000/22359/3 "2025-03-06T00:44:32Z")

</div>

Yes I have.

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [March 6, 2025, 6:33am UTC](https://klipper.discourse.group/t/must-home-axis-first-0-000-0-000-5-000-0-000/22359/4 "2025-03-06T06:33:28Z")

</div>

Try adding a

```auto
[safe_z_home]
home_xy_position: 200, 200
z_hop: 3

```

---

<div class="post-metadata">

**Author:** ![bcrazycramer](https://avatars.discourse-cdn.com/v4/letter/b/ed655f/32.png) [@bcrazycramer](https://klipper.discourse.group/u/bcrazycramer)\
**Post date:** [March 6, 2025, 7:03pm UTC](https://klipper.discourse.group/t/must-home-axis-first-0-000-0-000-5-000-0-000/22359/5 "2025-03-06T19:03:35Z")

</div>

I get this error:

home\_xy\_position cannot be used with [safe\_z\_home]

---

<div class="post-metadata">

**Author:** ![bcrazycramer](https://avatars.discourse-cdn.com/v4/letter/b/ed655f/32.png) [@bcrazycramer](https://klipper.discourse.group/u/bcrazycramer)\
**Post date:** [March 6, 2025, 7:25pm UTC](https://klipper.discourse.group/t/must-home-axis-first-0-000-0-000-5-000-0-000/22359/6 "2025-03-06T19:25:56Z")

</div>

It’s working now. Somehow I had this info under Beacon Config:

home\_xy\_position: 200, 200 # update with your safe position  
home\_z\_hop: 5  
home\_z\_hop\_speed: 30  
home\_xy\_move\_speed: 100  
home\_method: proximity #contact # use proximity for induction homing  
home\_method\_when\_homed: proximity # after initial calibration use induction  
home\_autocalibrate: never #unhomed # contact will calibrate beacon on first home

I commented all those out and can now finally after what seems like a month can use my HevORT.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [May 5, 2025, 7:26pm UTC](https://klipper.discourse.group/t/must-home-axis-first-0-000-0-000-5-000-0-000/22359/7 "2025-05-05T19:26:12Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.