# Need help, Printer.cfg file

**URL:** <https://klipper.discourse.group/t/need-help-printer-cfg-file/16031>\
**Category:** General Discussion\
**Created:** [April 25, 2024, 5:12pm UTC](https://klipper.discourse.group/t/need-help-printer-cfg-file/16031 "2024-04-25T17:12:18Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![kkn](https://avatars.discourse-cdn.com/v4/letter/k/f14d63/32.png) [@kkn](https://klipper.discourse.group/u/kkn)\
**Post date:** [April 25, 2024, 5:12pm UTC](https://klipper.discourse.group/t/need-help-printer-cfg-file/16031/1 "2024-04-25T17:12:18Z")

</div>

Hello everyone!

I’m not making printer but i want to control stepper motors with klipper. I’m using tmc driver 2209 and raspi 4b. And i’m interesting what configurations should i choose in this case? Or if anyone already did something like this and still have printer.cfg file can share it to me?

Thanks in advance.  
…

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [April 25, 2024, 5:21pm UTC](https://klipper.discourse.group/t/need-help-printer-cfg-file/16031/2 "2024-04-25T17:21:25Z")

</div>

Hello @kkn !

> [@kkn](#):
>
> something like this

I think you have to be a bit more precise what _this_ is.

---

<div class="post-metadata">

**Author:** ![kkn](https://avatars.discourse-cdn.com/v4/letter/k/f14d63/32.png) [@kkn](https://klipper.discourse.group/u/kkn)\
**Post date:** [April 25, 2024, 5:36pm UTC](https://klipper.discourse.group/t/need-help-printer-cfg-file/16031/3 "2024-04-25T17:36:23Z")

</div>

Printer configuration file, where tmc 2209 is used. But as i mentioned above, i’m not making printer and i think i won’t need some informations in printer.cfg file like “extruder”, “heater\_bed” and so on. If i’m wrong tell me, i’m beginner with klipper.

---

<div class="post-metadata">

**Author:** ![kkn](https://avatars.discourse-cdn.com/v4/letter/k/f14d63/32.png) [@kkn](https://klipper.discourse.group/u/kkn)\
**Post date:** [April 25, 2024, 5:46pm UTC](https://klipper.discourse.group/t/need-help-printer-cfg-file/16031/4 "2024-04-25T17:46:23Z")

</div>

I have raspi 4b that is connected ro raspi pico H. And raspi pico is connected to tmc 2209 drivers only with UART pin. I have only two steppers: stepper x and stepper y and corexy configuration.

---

<div class="post-metadata">

**Author:** ![theophile](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/theophile/32/31_2.png) [@theophile](https://klipper.discourse.group/u/theophile)\
**Post date:** [April 25, 2024, 9:41pm UTC](https://klipper.discourse.group/t/need-help-printer-cfg-file/16031/5 "2024-04-25T21:41:38Z")

</div>

Maybe something like this would be more appropriate for what you’re trying to accomplish: [GitHub - Chr157i4n/TMC2209\_Raspberry\_Pi: this is a Python library to drive a stepper motor with a Trinamic TMC2209 stepper driver and a Raspberry Pi](https://github.com/Chr157i4n/TMC2209_Raspberry_Pi)

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [June 24, 2024, 9:42pm UTC](https://klipper.discourse.group/t/need-help-printer-cfg-file/16031/6 "2024-06-24T21:42:33Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.