# New klipper/mainsail/fluidd install **URL:** \ **Category:** General Discussion\ **Created:** [April 21, 2024, 6:36pm UTC](https://klipper.discourse.group/t/new-klipper-mainsail-fluidd-install/15937 "2024-04-21T18:36:37Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![gene1934](https://avatars.discourse-cdn.com/v4/letter/g/3d9bf3/32.png) [@gene1934](https://klipper.discourse.group/u/gene1934)\ **Post date:** [April 21, 2024, 6:36pm UTC](https://klipper.discourse.group/t/new-klipper-mainsail-fluidd-install/15937/1 "2024-04-21T18:36:37Z")
### Basic Information: Printer Model: ender5+ rebuilt MCU / Printerboard:octopus pro v1.1 Host / SBC bananapi-m5 klippy.log not made any yet _Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_ _ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _ ### Describe your issue: bringing up a highly modified Ender5plus. I’ve installed by kiauh, made a firmware.bin and reflashed the btt octopus pro v1.1. I have put that printer.cfg in /home/me/printer\_data/config.I don’t have octoprint, so how do I go about getting my first console so I can run the config\_checks.md tools? Installation.md seems to assume octoprint, but I’ll not normally use it. … ---
**Author:** ![gene1934](https://avatars.discourse-cdn.com/v4/letter/g/3d9bf3/32.png) [@gene1934](https://klipper.discourse.group/u/gene1934)\ **Post date:** [April 21, 2024, 8:16pm UTC](https://klipper.discourse.group/t/new-klipper-mainsail-fluidd-install/15937/2 "2024-04-21T20:16:53Z")
nevermind, finally found firefox localhost:80 gets me there. Why does it not say so in the docs? Thanks ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [April 22, 2024, 6:25am UTC](https://klipper.discourse.group/t/new-klipper-mainsail-fluidd-install/15937/3 "2024-04-22T06:25:08Z")
Mention, that the browser runs on the same device as the Klipper/Mainsail/Fluidd installation would have made a difference. ---
**Author:** ![gene1934](https://avatars.discourse-cdn.com/v4/letter/g/3d9bf3/32.png) [@gene1934](https://klipper.discourse.group/u/gene1934)\ **Post date:** [April 23, 2024, 10:03am UTC](https://klipper.discourse.group/t/new-klipper-mainsail-fluidd-install/15937/4 "2024-04-23T10:03:31Z")
On my local network, all behind my router, that machine has an alias in the hosts files, and I can see and control that machine by sending chromium or firefox to e5p:80. From any other machine here. Ditto an ssh -X login, or for file xfers, sshfs. This machine has the best monitor and the most comfortable chair, so I do a lot of maintenance/configuring work from this chair. No difference in the result. So I’m curious, what difference does it make? ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [April 23, 2024, 10:07am UTC](https://klipper.discourse.group/t/new-klipper-mainsail-fluidd-install/15937/5 "2024-04-23T10:07:26Z")
> [@gene1934](#): > > localhost That implies that the browser runs on the same system as Mainsail/Fluidd ---
**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\ **Post date:** [May 23, 2024, 8:08pm UTC](https://klipper.discourse.group/t/new-klipper-mainsail-fluidd-install/15937/6 "2024-05-23T20:08:06Z")
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.