# Odd StallGuard behavior - TMC5160 + ldo-42sth48-2004mah **URL:** \ **Category:** General Discussion\ **Created:** [October 24, 2025, 12:24pm UTC](https://klipper.discourse.group/t/odd-stallguard-behavior-tmc5160-ldo-42sth48-2004mah/25089 "2025-10-24T12:24:54Z")\ **Posts on this page:** 1\ **Showing post:** 8
**Author:** ![hcet14](https://avatars.discourse-cdn.com/v4/letter/h/ecd19e/32.png) [@hcet14](https://klipper.discourse.group/u/hcet14)\ **Post date:** [October 24, 2025, 7:20pm UTC](https://klipper.discourse.group/t/odd-stallguard-behavior-tmc5160-ldo-42sth48-2004mah/25089/8 "2025-10-24T19:20:26Z")
@kawabunga Hello kawabunga, I hope you got a real good house insurance 😉 Can you and your family easily escape, when the house burns down? I wouldn’t touch Kalico! Literally all rational safety measures from Klipper are deactivated. I suggest to use at least something like this [Heater Bed Temperature is increasing without heating - #20 by hcet14](https://klipper.discourse.group/t/heater-bed-temperature-is-increasing-without-heating/10894/20), when using Kalico. Call me “Safety N\*zi” or chicken-hearted, but I would never risk my life (and/or the life of others!) for my hobby. The Internet is full of burning FDM printers! One of the main reasons for me to switch from Marlin to Klipper are the safety measures! --- _[View the full topic](https://klipper.discourse.group/t/odd-stallguard-behavior-tmc5160-ldo-42sth48-2004mah/25089)._