# Orca not connecting for me **URL:** \ **Category:** General Discussion\ **Created:** [September 20, 2024, 12:36am UTC](https://klipper.discourse.group/t/orca-not-connecting-for-me/18918 "2024-09-20T00:36:11Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Drlevi](https://avatars.discourse-cdn.com/v4/letter/d/71c47a/32.png) [@Drlevi](https://klipper.discourse.group/u/Drlevi)\ **Post date:** [September 20, 2024, 12:36am UTC](https://klipper.discourse.group/t/orca-not-connecting-for-me/18918/1 "2024-09-20T00:36:11Z")
### Basic Information: Printer Model: tender 6, tender 3 MCU / Printerboard:manta m4p Host / SBC. Btt pi 1.2 klippy.log Want to try out orca slicer so I downloaded it and setup etc. now when I go into the device connection I put info in and keep getting an error of I need octoprint 1.1.0 or higher? I am using mainsail and through searching I see others have connected so followed what they have done but still get same error. So curious if anyone else knows a solution?. Thank you ---
**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\ **Post date:** [September 20, 2024, 3:14pm UTC](https://klipper.discourse.group/t/orca-not-connecting-for-me/18918/2 "2024-09-20T15:14:06Z")
Are you able to connect to Mainsail in your browser and successfully control Klipper? Post your `klippy.log` as requested anyway and in addition the `moonraker.log` file ---
**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\ **Post date:** [November 19, 2024, 3:14pm UTC](https://klipper.discourse.group/t/orca-not-connecting-for-me/18918/3 "2024-11-19T15:14:11Z")
This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.