# Possible bug in G3 (arc) command

**URL:** <https://klipper.discourse.group/t/possible-bug-in-g3-arc-command/7611>\
**Category:** General Discussion\
**Created:** [April 2, 2023, 3:45pm UTC](https://klipper.discourse.group/t/possible-bug-in-g3-arc-command/7611 "2023-04-02T15:45:01Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [April 3, 2023, 7:18am UTC](https://klipper.discourse.group/t/possible-bug-in-g3-arc-command/7611/8 "2023-04-03T07:18:17Z")

</div>

Your issue is not related to G3. In fact the error message is [Timer too close](https://klipper.discourse.group/t/timer-too-close/6634). The other errors are consequential errors.  
When checking a klippy.log always start at the bottom and work your way up until you find the first error

---

_[View the full topic](https://klipper.discourse.group/t/possible-bug-in-g3-arc-command/7611)._