# Pressure advance issues - not making a difference

**URL:** <https://klipper.discourse.group/t/pressure-advance-issues-not-making-a-difference/10068>\
**Category:** General Discussion\
**Created:** [August 23, 2023, 5:20am UTC](https://klipper.discourse.group/t/pressure-advance-issues-not-making-a-difference/10068 "2023-08-23T05:20:46Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [August 23, 2023, 5:37pm UTC](https://klipper.discourse.group/t/pressure-advance-issues-not-making-a-difference/10068/5 "2023-08-23T17:37:38Z")

</div>

> [@analognmd](#):
>
> I totally missed that the nozzle size was set to 0.4 in the printer config

This is unrelated to PA. The nozzle size in Klipper is only used for certain sanity checks. Also see [Move exceeds maximum extrusion (AA mm^2 vs BB mm^2)](https://klipper.discourse.group/t/move-exceeds-maximum-extrusion-aa-mm-2-vs-bb-mm-2/6636) if you are interested in some background information.

---

_[View the full topic](https://klipper.discourse.group/t/pressure-advance-issues-not-making-a-difference/10068)._
