# Printer.cfg for Anycubic Kobra 2 Plus/Pro/Max

**URL:** <https://klipper.discourse.group/t/printer-cfg-for-anycubic-kobra-2-plus-pro-max/11658>\
**Category:** Configs\
**Created:** [November 17, 2023, 11:56pm UTC](https://klipper.discourse.group/t/printer-cfg-for-anycubic-kobra-2-plus-pro-max/11658 "2023-11-17T23:56:49Z")\
**Posts on this page:** 1\
**Showing post:** 202

<div class="post-metadata">

**Author:** ![Dump](https://avatars.discourse-cdn.com/v4/letter/d/f05b48/32.png) [@Dump](https://klipper.discourse.group/u/Dump)\
**Post date:** [February 26, 2024, 11:09pm UTC](https://klipper.discourse.group/t/printer-cfg-for-anycubic-kobra-2-plus-pro-max/11658/202 "2024-02-26T23:09:53Z")

</div>

Hi,  
We have attempted to communicate with Anycubic regarding two critical security vulnerabilities we identified, in particoular one can be catastrophic if found by a malicious.  
Despite our efforts over the past two months, we have not received a single response to our three emails. These vulnerabilities are significant, and we have invested considerable time and effort into addressing them.  
Despite our initial intention to resolve the issue amicably, (and we still hope in it) it appears that our concerns have not been taken seriously by Anycubic.  
Consequently, we are now preparing to disclose these vulnerabilities to the public  
along with our repo and our tools.

---

_[View the full topic](https://klipper.discourse.group/t/printer-cfg-for-anycubic-kobra-2-plus-pro-max/11658)._