# Printer.cfg for Anycubic Kobra 2 Plus/Pro/Max

**URL:** <https://klipper.discourse.group/t/printer-cfg-for-anycubic-kobra-2-plus-pro-max/11658>\
**Category:** Configs\
**Created:** [November 17, 2023, 11:56pm UTC](https://klipper.discourse.group/t/printer-cfg-for-anycubic-kobra-2-plus-pro-max/11658 "2023-11-17T23:56:49Z")\
**Posts on this page:** 1\
**Showing post:** 213

<div class="post-metadata">

**Author:** ![Dump](https://avatars.discourse-cdn.com/v4/letter/d/f05b48/32.png) [@Dump](https://klipper.discourse.group/u/Dump)\
**Post date:** [February 29, 2024, 9:01am UTC](https://klipper.discourse.group/t/printer-cfg-for-anycubic-kobra-2-plus-pro-max/11658/213 "2024-02-29T09:01:34Z")

</div>

I’m not sure what you’re referring to. We found a critical system vulnerability and reported it to Anycubic email. Root access is available for versions 2.3.9 and **above** , but it’s not publicly accessible yet. Currently, we’re focused on enhancing printer functionality through the native app. Running Klipper at the moment isn’t feasible.

---

_[View the full topic](https://klipper.discourse.group/t/printer-cfg-for-anycubic-kobra-2-plus-pro-max/11658)._