# Printer\_data/config/cx\_gmcro.cfg' does not exist

**URL:** <https://klipper.discourse.group/t/printer-data-config-cx-gmcro-cfg-does-not-exist/14656>\
**Category:** General Discussion\
**Created:** [March 4, 2024, 4:29pm UTC](https://klipper.discourse.group/t/printer-data-config-cx-gmcro-cfg-does-not-exist/14656 "2024-03-04T16:29:58Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mardak](https://avatars.discourse-cdn.com/v4/letter/m/c0e974/32.png) [@Mardak](https://klipper.discourse.group/u/Mardak)\
**Post date:** [March 4, 2024, 4:29pm UTC](https://klipper.discourse.group/t/printer-data-config-cx-gmcro-cfg-does-not-exist/14656/1 "2024-03-04T16:29:58Z")

</div>

### Basic Information:

Printer Model: Ender 3 Max  
 MCU / Printerboard: 4.2.2  
 `klippy.log`

Hello,

I have installed Klipper on a Pi 3 and getting this error: printer\_data/config/cx\_gmcro.cfg’ does not exist and can not find any information about it.

thank you  
best regards

Amir  
[klippy-2.log](https://klipper.discourse.group/uploads/short-url/zh51yp4xukiPv1DWT04ijJU8Y3b.log) (205.6 KB)

_Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_  
_ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _

### Describe your issue:

…

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [March 4, 2024, 5:20pm UTC](https://klipper.discourse.group/t/printer-data-config-cx-gmcro-cfg-does-not-exist/14656/2 "2024-03-04T17:20:13Z")

</div>

> [@Mardak](#):
>
> cx\_gmcro.cfg

Somewhere in your config you have an `[include cx_gmcro.cfg]` which tried to include a file that apparently does not exist.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [May 3, 2024, 5:21pm UTC](https://klipper.discourse.group/t/printer-data-config-cx-gmcro-cfg-does-not-exist/14656/3 "2024-05-03T17:21:01Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.