# QUAD\_GANTRY\_LEVEL internal error

**URL:** <https://klipper.discourse.group/t/quad-gantry-level-internal-error/18015>\
**Category:** General Discussion\
**Created:** [August 1, 2024, 7:17am UTC](https://klipper.discourse.group/t/quad-gantry-level-internal-error/18015 "2024-08-01T07:17:08Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![WeissNicht](https://avatars.discourse-cdn.com/v4/letter/w/b5e925/32.png) [@WeissNicht](https://klipper.discourse.group/u/WeissNicht)\
**Post date:** [August 15, 2024, 4:04pm UTC](https://klipper.discourse.group/t/quad-gantry-level-internal-error/18015/7 "2024-08-15T16:04:27Z")

</div>

I had a similiar issue on my voron. I now have the indication, it might have been the led\_effects. I see in your log, you are using these as well.

See:

> [@MCU goes to shutdown](https://klipper.discourse.group/t/mcu-goes-to-shutdown/18263/11):
>
> Another Printjob finished without any issues. Afterwards I reactivated led\_effects and after 3 min in the print…voilá shutdown. I think this might be a strong indication what was going on there.

Could you try disabeling the led\_effects to test if your issues still persists afterwards.

---

_[View the full topic](https://klipper.discourse.group/t/quad-gantry-level-internal-error/18015)._
