# Resume print from specific layer after failed print **URL:** \ **Category:** General Discussion\ **Created:** [November 25, 2023, 6:30pm UTC](https://klipper.discourse.group/t/resume-print-from-specific-layer-after-failed-print/11856 "2023-11-25T18:30:30Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\ **Post date:** [November 25, 2023, 7:06pm UTC](https://klipper.discourse.group/t/resume-print-from-specific-layer-after-failed-print/11856/2 "2023-11-25T19:06:18Z")
> [@\[Feature Request\] - Simple Power Loss Recovery Setting](https://klipper.discourse.group/t/feature-request-simple-power-loss-recovery-setting/6815): > > There should a power loss recovery for klipper. Some sort of recording of what layer it was last on before sudden interruption would be a good starting point to resume prints. It doesn’t even have to direct resume , it could just specify the layer it was last printed without having to dig through the logs and make cutting the rest of the model to print easier. I was thinking a checkpoint system would work , as in specifying if a layer is finished before moving on to the next. Then , if a laye… --- _[View the full topic](https://klipper.discourse.group/t/resume-print-from-specific-layer-after-failed-print/11856)._