# Retrieving the \`\[menu\]\` entries

**URL:** <https://klipper.discourse.group/t/retrieving-the-menu-entries/6910>\
**Category:** Developers\
**Created:** [February 26, 2023, 3:25pm UTC](https://klipper.discourse.group/t/retrieving-the-menu-entries/6910 "2023-02-26T15:25:11Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![pedrolamas](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/pedrolamas/32/22261_2.png) [@pedrolamas](https://klipper.discourse.group/u/pedrolamas)\
**Post date:** [February 26, 2023, 3:25pm UTC](https://klipper.discourse.group/t/retrieving-the-menu-entries/6910/1 "2023-02-26T15:25:11Z")

</div>

I am looking into implementing a web UI for the `[menu]` entries in Fluidd.

I am still formulating this idea, but I believe this could provide value as an easy way to show the menu configuration directly on a computer/phone/tablet (showing the simplified interface in “kiosk mode”), but also as a means to test the said configuration.

I managed to expose this under the `menu` object status:

 ![image](https://global.discourse-cdn.com/free1/uploads/klipper/original/2X/1/13deaa55301ae2a1b73c9291faa8acabcd0126a2.png)

The above should be the merged result from the default “menu.cfg” and the users own “printer.cfg”.

As I am not entirely convinced that this is the correct place to have this, I wanted to get feedback before I even send a PR to make this data visible.

The changes for the above example can be seen here:

> **[Comparing Klipper3d:master...pedrolamas:pedrolamas/menu\_config ·...](https://github.com/Klipper3d/klipper/compare/master...pedrolamas:klipper:pedrolamas/menu_config)**
>
> Klipper is a 3d-printer firmware. Contribute to Klipper3d/klipper development by creating an account on GitHub.