# \[Review request\] Bed Mesh: using z axis lift speed instead general speed

**URL:** <https://klipper.discourse.group/t/review-request-bed-mesh-using-z-axis-lift-speed-instead-general-speed/8126>\
**Category:** Developers\
**Created:** [April 30, 2023, 9:45am UTC](https://klipper.discourse.group/t/review-request-bed-mesh-using-z-axis-lift-speed-instead-general-speed/8126 "2023-04-30T09:45:50Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![gatools](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/gatools/32/5236_2.png) [@gatools](https://klipper.discourse.group/u/gatools)\
**Post date:** [April 30, 2023, 9:45am UTC](https://klipper.discourse.group/t/review-request-bed-mesh-using-z-axis-lift-speed-instead-general-speed/8126/1 "2023-04-30T09:45:50Z")

</div>

Hello  
Recently I made pull request for fixing Z axis speed for Bed Mesh and Bed Screws  
Please review my request  
[https://github.com/Klipper3d/klipper/pull/6016](https://github.com/Klipper3d/klipper/pull/6016)