# Rounded corners

**URL:** <https://klipper.discourse.group/t/rounded-corners/20027>\
**Category:** General Discussion\
**Created:** [November 13, 2024, 3:13am UTC](https://klipper.discourse.group/t/rounded-corners/20027 "2024-11-13T03:13:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![victorlin](https://avatars.discourse-cdn.com/v4/letter/v/94ad74/32.png) [@victorlin](https://klipper.discourse.group/u/victorlin)\
**Post date:** [November 13, 2024, 3:13am UTC](https://klipper.discourse.group/t/rounded-corners/20027/1 "2024-11-13T03:13:33Z")

</div>

### Basic Information:

Printer Model: FLSun V400  
 MCU / Printerboard: Nano v2 clone

### Describe your issue:

Corners on my V400 always comes out rounded, in my slicer preview, corners are sharp and clean, so I think the printer is cutting corners to maintain a constant speed.

What settings should/can i adjust so that the machine prints the corners sharply and cleanly without affecting the print speed too much?

thanks.

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [November 13, 2024, 8:06am UTC](https://klipper.discourse.group/t/rounded-corners/20027/2 "2024-11-13T08:06:38Z")

</div>

See [How-To Ask for Help](https://klipper.discourse.group/t/how-to-ask-for-help/6327/1)

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [January 12, 2025, 8:07am UTC](https://klipper.discourse.group/t/rounded-corners/20027/3 "2025-01-12T08:07:23Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.