# Rpi and printer freezes during print

**URL:** <https://klipper.discourse.group/t/rpi-and-printer-freezes-during-print/25498>\
**Category:** General Discussion\
**Created:** [January 8, 2026, 4:59pm UTC](https://klipper.discourse.group/t/rpi-and-printer-freezes-during-print/25498 "2026-01-08T16:59:43Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Fillipooo](https://avatars.discourse-cdn.com/v4/letter/f/3bc359/32.png) [@Fillipooo](https://klipper.discourse.group/u/Fillipooo)\
**Post date:** [January 8, 2026, 7:29pm UTC](https://klipper.discourse.group/t/rpi-and-printer-freezes-during-print/25498/2 "2026-01-08T19:29:09Z")

</div>

My situation most closely resembles the problem solved in this thread:

> [@Print suddenly stops during print](https://klipper.discourse.group/t/print-suddenly-stops-during-print/18000):
>
> Basic Information: Printer Model: artillery sidewinder x2 MCU / Printerboard: mainsail, moonraker Host / SBC: raspberry pi 3 klippy.log [klippy(1).log](https://klipper.discourse.group/uploads/short-url/yp1KEpqqAbTZO5XbhV3h8yG5uZ8.log) (1.8 MB) Describe your issue: My printer stopped twice now during my last 2 prints. All the prints before were working fine. I’m quite new into klipper. Don’t know where to look at.

As a result, I have ordered a replacement power supply and a new USB cable. I plan to test both, and it’s always useful to have a few extra cables on hand.

I will get back here when i have tested it.

---

_[View the full topic](https://klipper.discourse.group/t/rpi-and-printer-freezes-during-print/25498)._