# Scurve-pa branch

**URL:** <https://klipper.discourse.group/t/scurve-pa-branch/7621>\
**Category:** Developers\
**Created:** [April 2, 2023, 10:51pm UTC](https://klipper.discourse.group/t/scurve-pa-branch/7621 "2023-04-02T22:51:08Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Blackstump](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/blackstump/32/6512_2.png) [@Blackstump](https://klipper.discourse.group/u/Blackstump)\
**Post date:** [April 4, 2023, 10:05pm UTC](https://klipper.discourse.group/t/scurve-pa-branch/7621/3 "2023-04-04T22:05:29Z")

</div>

I was a fan of scurve when you first implemented way back and I liked that the stepper motors while printing seem quiet and printer smoother not a scientific answer.  
I wasn’t sure if it was ok to use but had to have a play hehe.  
Thanks for you work but from what you have said I will just leave it alone.

---

_[View the full topic](https://klipper.discourse.group/t/scurve-pa-branch/7621)._