# Self made 3D Printer with octopus v1.1 Board

**URL:** <https://klipper.discourse.group/t/self-made-3d-printer-with-octopus-v1-1-board/5186>\
**Category:** General Discussion\
**Created:** [December 2, 2022, 10:15am UTC](https://klipper.discourse.group/t/self-made-3d-printer-with-octopus-v1-1-board/5186 "2022-12-02T10:15:50Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dan1el](https://avatars.discourse-cdn.com/v4/letter/d/e47774/32.png) [@Dan1el](https://klipper.discourse.group/u/Dan1el)\
**Post date:** [December 2, 2022, 10:15am UTC](https://klipper.discourse.group/t/self-made-3d-printer-with-octopus-v1-1-board/5186/1 "2022-12-02T10:15:51Z")

</div>

I have a self made 3D Printer with the board Octopus V1.1 chip Stm32F446ZET6  
I want use Klipper an I Need a Printer.cfg There are so many cfg to use in the internet have somebody experience?  
Thanks for help

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [December 2, 2022, 10:36am UTC](https://klipper.discourse.group/t/self-made-3d-printer-with-octopus-v1-1-board/5186/2 "2022-12-02T10:36:29Z")

</div>

See [BIGTREETECH-OCTOPUS-V1.0/Firmware/Klipper at master · bigtreetech/BIGTREETECH-OCTOPUS-V1.0 · GitHub](https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-V1.0/tree/master/Firmware/Klipper)

---

<div class="post-metadata">

**Author:** ![Dan1el](https://avatars.discourse-cdn.com/v4/letter/d/e47774/32.png) [@Dan1el](https://klipper.discourse.group/u/Dan1el)\
**Post date:** [December 2, 2022, 11:43am UTC](https://klipper.discourse.group/t/self-made-3d-printer-with-octopus-v1-1-board/5186/3 "2022-12-02T11:43:06Z")

</div>

@Sineos Thanks you I will try it ❤

---

<div class="post-metadata">

**Author:** ![winstontj](https://avatars.discourse-cdn.com/v4/letter/w/f14d63/32.png) [@winstontj](https://klipper.discourse.group/u/winstontj)\
**Post date:** [December 2, 2022, 6:04pm UTC](https://klipper.discourse.group/t/self-made-3d-printer-with-octopus-v1-1-board/5186/4 "2022-12-02T18:04:06Z")

</div>

If you ssh into your raspberry pi or other machine running Klipper, you should have a folder /home/pi/klipper/config that has a bunch of example files also.

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [May 26, 2024, 2:28pm UTC](https://klipper.discourse.group/t/self-made-3d-printer-with-octopus-v1-1-board/5186/5 "2024-05-26T14:28:52Z")

</div>