# Service "klipper" not allowed (linuxDeploy Android)

**URL:** <https://klipper.discourse.group/t/service-klipper-not-allowed-linuxdeploy-android/23315>\
**Category:** General Discussion\
**Created:** [May 6, 2025, 3:34pm UTC](https://klipper.discourse.group/t/service-klipper-not-allowed-linuxdeploy-android/23315 "2025-05-06T15:34:35Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Varon9](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/varon9/32/18838_2.png) [@Varon9](https://klipper.discourse.group/u/Varon9)\
**Post date:** [May 6, 2025, 3:34pm UTC](https://klipper.discourse.group/t/service-klipper-not-allowed-linuxdeploy-android/23315/1 "2025-05-06T15:34:35Z")

</div>

### Basic Information:

Printer Model: Ender 3 v3 SE  
 MCU / Printerboard: CR4NS200320C13  
 Host / SBC e3v3.se  
 [klippy.log](https://klipper.discourse.group/uploads/short-url/1dskzhmpmHp6lo4GChJ5VNccNM7.log) (222.1 KB)

### Describe your issue:

nothing shown under services in fluidd, a message from it saying klippy is not connected, and the error message "service “klipper” not allowed when pushing restart button, i’ve tried reinstalling klipper from kiauh, restarting de phone/container with the same result, followed [this guide](https://github.com/d4rk50ul1/klipper-on-android) from the user d4rk50ul1  
…

I’m a complete noob at 3d printing (i have the printer since february) and i was trying to convert it to klipper without a rasp

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [May 6, 2025, 3:54pm UTC](https://klipper.discourse.group/t/service-klipper-not-allowed-linuxdeploy-android/23315/2 "2025-05-06T15:54:50Z")

</div>

Well, this is not the kind of deployment we support, and I would consider it highly experimental. Klipper strongly relies on a very stable and undisturbed Linux foundation. Running it as described in the guide may or may not work.

---

<div class="post-metadata">

**Author:** ![Varon9](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/varon9/32/18838_2.png) [@Varon9](https://klipper.discourse.group/u/Varon9)\
**Post date:** [May 6, 2025, 4:08pm UTC](https://klipper.discourse.group/t/service-klipper-not-allowed-linuxdeploy-android/23315/3 "2025-05-06T16:08:02Z")

</div>

I was afraid of it… Because I haven’t found almost any information about it 😅, but I had to try, thanks anyway! 😁

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [July 5, 2025, 4:08pm UTC](https://klipper.discourse.group/t/service-klipper-not-allowed-linuxdeploy-android/23315/4 "2025-07-05T16:08:33Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.