# Set and Wait temp issue

**URL:** <https://klipper.discourse.group/t/set-and-wait-temp-issue/19003>\
**Category:** General Discussion\
**Created:** [September 24, 2024, 12:19pm UTC](https://klipper.discourse.group/t/set-and-wait-temp-issue/19003 "2024-09-24T12:19:18Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [September 24, 2024, 1:48pm UTC](https://klipper.discourse.group/t/set-and-wait-temp-issue/19003/2 "2024-09-24T13:48:10Z")

</div>

Firstly, please follow the template when opening such a request. It is there for a reason.

Regarding your issue, your `START_PRINT_ADAPTIVE` seems incomplete. There is no code that would accept and parse the temperature as handed over by the slicer.

Refer to [Using START\_PRINT and END\_PRINT Macros](https://klipper.discourse.group/t/using-start-print-and-end-print-macros/15459) for an example how it should look like.

---

_[View the full topic](https://klipper.discourse.group/t/set-and-wait-temp-issue/19003)._