So I have a TP link plug set up with my pi called pi I have added the code in this link to my idle and end print TPLink power off delay doesn't work correct opened 11:32AM - 14 Feb 22 UTC (UTC) [Caipitroo…

My advice, don’t use it. When the first devices came up, I was playing a lot with those. You always get different results, when changing the electricity plugs in a house or changing houses. If you really want to use it, check the network for QoS. There are a lot of test tools in the www.

This is the actual code [idle_timeout] gcode: M84 TURN_OFF_HEATERS {% if printer["gcode_macro TURNOFF_CHANGE"].turnoff|int > 0 %} TEMPERATURE_WAIT SENSOR=extruder MAXIMUM=40 #Don't switch off when hot SEND_POWER_OFF SHUTDOWN_MACHINE {% endif %} [gcode_macro TUR…

A great option if you have a decent home automation hub, like Hubitat which has a Klipper / moonraker integration, is to automate a Zigbee or zwave smart plug. [image] [RELEASE] Klipper/Moonraker 3D Printer Driver Hi, I saw the Octoprint driver didn't fully support Klipper, so I wr…

@doormat1 Hello. I am working on klipper firmware for my printer. I want my printer will automatic shutdown after completing the print. I didnt get any information regarding this on the internet. I do not want to use any device e.g TPLink devices or Tsamota Devices for this. I need any programm or …

[idle_timeout] gcode: {% if printer.pause_resume.is_paused %} {% set TARGET_TEMP = params.TARGET | default(220) | float %} SET_GCODE_VARIABLE MACRO=IDLE_TIMEOUT VARIABLE=temp_target VALUE={ TARGET_TEMP } M117 Idle but paused, maintaining bed temp. SET_HEATER_TEMPERATURE HEATER=extruder TARGET=0 {% e…

@doormat1 : Please, when you upload code as text and not as file, use the Preformatted Text feature of the forum editor. Else the upload is useless because characters and spaces are deleted. [Format]

[delayed_gcode bed_safety] initial_duration: 2. gcode: {% if printer.heater_bed.temperature >= settings.heater_bed.max_temp %} M118 EXCEED_THERMAL_LIMIT_BED POWER_OFF_PRINTER {% else %} UPDATE_DELAYED_GCODE ID=bed_safety DURATION=2 {% endif %} [delayed_gcode extruder_safety] initi…

Could you do that for your previous post too? Thank you.

Shutting down printer after print

General Discussion

Sineos April 12, 2023, 7:15am 3

See Shutdown on Thermal Runaway

Topic		Replies	Views
Shutdown on Thermal Runaway General Discussion	10	2437	April 5, 2023
Providing Macrofile: Optionally shutdown after printing Macros	28	6851	October 3, 2024
Failed print due to following error message: Transition to shutdown state: Previous MCU 'mcu' shutdown: Timer too close General Discussion	15	1760	July 2, 2023
Klipper Auto Power Off - Smart Shutdown Module Developers	0	902	March 14, 2025
Smart plug to allow PI to shut down printer General Discussion	3	6426	July 4, 2022

Shutting down printer after print

Related topics